General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

Wiper blade removal

Thread Tools
 
Search this Thread
 
Old 09-02-2009, 02:12 PM
  #1  
Green '92
1st Gear Member
Thread Starter
 
Green '92's Avatar
 
Join Date: Jul 2009
Location: Michigan
Posts: 69
Default Wiper blade removal

On a '92 GT. How the hell do they come off? I don't want to replace the whole damn arm.. Looks like the blades have some kind of spring deal going on?
Green '92 is offline  
Old 09-02-2009, 03:45 PM
  #2  
ChalknCover
Sgt. Killjoy
 
ChalknCover's Avatar
 
Join Date: Sep 2008
Location: DMV
Posts: 2,090
Default

There should be instructions on the box for the new wipers, it is pretty simple. a lot just require you to grab and push.
ChalknCover is offline  
Old 09-02-2009, 05:39 PM
  #3  
Green '92
1st Gear Member
Thread Starter
 
Green '92's Avatar
 
Join Date: Jul 2009
Location: Michigan
Posts: 69
Default

I have changed tons of blades before, but never seen a set-up like this.. I tried pulling the blade, nothing...
Green '92 is offline  
Old 09-12-2009, 03:07 PM
  #4  
WP Dairy
 
WP Dairy's Avatar
 
Join Date: Sep 2009
Location: California
Posts: 1
Default

If it's like a `91, you have to flip the blade over then invert it as far as it will go. This will extend the springs and open up the hole big enough to work off of the pin. You may have to get you thumb and first finger under the 'wings' to keep it inverted enough to shimmy it off.
WP Dairy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BOB ROME
5.0L (1979-1995) Mustang
3
07-26-2023 01:54 PM
jma2
2005-2014 Mustangs
8
07-10-2023 01:00 AM
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
jrrhd73must
Classic Mustang General Discussion
2
10-02-2015 09:17 PM



Quick Reply: Wiper blade removal



All times are GMT -5. The time now is 07:59 AM.