hi guys, im new to the forums and pretty new to the mustang world [im 18] but i have an 85 notch that came with a 2.3 carbed and i swapped it out for a carbed 5.0 i just need to know how to wire this thing to get spark and to charge the battery because i have no acessories. is there a way i can go with a clean look and buy my own color coded wires and make my own simple wiring harness? because i cant seem to locate all the alternator wires because some of them ripped. oh and the wiring to the sending units i cut short and taped off and put back in the corrugated plastic wire tubing. any help would be verrry appreciated.

 

have you checked out a wiring diagram for the carbed 5.0 to help locate all the wires for the alternator?

 

im thinking about just re wiring the alternator, ignition and an out of tank fuel pump an msd 6al will do my ignition duties. cant i just get some colorcoded wire a solderong gun and some shrink wrap and get a basic race car style wiring diagram? does one exist? lol, please im trying to get this prject on the road before condensation builds in the cylinder walls