Power Window Motor
05-20-2012, 10:43 PM
#1
Thread Starter
Join Date: May 2012
Location: TN
Posts: 2
Power Window Motor
I have the same problem that is shown in this 25 second youtube video -
http://www.youtube.com/watch?v=on06UBe5flU
The window opens, but when it reaches the bottom, the motor doesn't stop. When closing the window, sometimes it goes all the way up. Sometimes it stops like in the video.
I took the motor out and it seems to function up and down. However, I took a pair of channel locks and grabbed the shaft to simulate window reaching the bottom. The resistance should cause the motor to stop, but it doesn't.
Is there a relay somewhere that is malfunctioning? or is there something inside the motor that's not working correctly? I'd hate to buy a new motor and it not be the problem.
Any help would be greatly appreciated.
John
'94 Mustang Cobra
http://www.youtube.com/watch?v=on06UBe5flU
The window opens, but when it reaches the bottom, the motor doesn't stop. When closing the window, sometimes it goes all the way up. Sometimes it stops like in the video.
I took the motor out and it seems to function up and down. However, I took a pair of channel locks and grabbed the shaft to simulate window reaching the bottom. The resistance should cause the motor to stop, but it doesn't.
Is there a relay somewhere that is malfunctioning? or is there something inside the motor that's not working correctly? I'd hate to buy a new motor and it not be the problem.
Any help would be greatly appreciated.
John
'94 Mustang Cobra
05-21-2012, 01:10 AM
#2
4th Gear Member
Join Date: Dec 2010
Location: Gallifrey
Posts: 1,596
Bushings..View second and fourth posts in that thread:
http://www.allfordmustangs.com/forum...-problems.html
http://www.allfordmustangs.com/forum...-problems.html
Last edited by wayne613; 05-21-2012 at 01:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
