General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

No spark after engine swap??

Thread Tools
 
Search this Thread
 
Old 06-02-2012, 11:32 PM
  #1  
67fastbackgreen
Thread Starter
 
67fastbackgreen's Avatar
 
Join Date: Dec 2008
Location: washington
Posts: 49
Default No spark after engine swap??

So I have the 347 in my 67, the donor car was an 82 fox. The distributor has 3 wires, black, grey or blue (hard to tell) and orange. This isn't the same as the 67 wires, so I'm not sure if I have them hooked up right. there is no spark from the coil. I've hooked it up every way I could think of, and nothing. Maybe I fried something, I don't know. Kinda sick of it honestly. Does anyone have a clue as to what might be going on? I've tried to get a diagram for the ignition for an 82 fox, but I can't find one anywhere! Any suggestions would be really appriciated...

Thanks!!
67fastbackgreen is offline  
Old 06-18-2012, 03:57 PM
  #2  
67fastbackgreen
Thread Starter
 
67fastbackgreen's Avatar
 
Join Date: Dec 2008
Location: washington
Posts: 49
Default

For anyone who looked at this and has the same problem, it was the hei distributor, it's not compatable without an ignition box...
67fastbackgreen is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MusicCity615
New Member Area
18
09-27-2015 12:53 AM
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM
KEM Motorworks
5.0L (1979-1995) Mustang
20
08-14-2015 10:13 PM
Jacob4589
5.0L (1979-1995) Mustang
3
08-08-2015 11:00 AM



Quick Reply: No spark after engine swap??



All times are GMT -5. The time now is 07:01 PM.