Daughter has 2004 and BF got her new Raxiom Projector headlights. Installation was simple and he did the work. When I saw them today looked good but this evening when on the low beam was very low and 1/2 the light or stock lights. Is there any way to get the low beam to adjust up?

Thanks

 

NO IDEA REGARDING THIS BUT I WOULD RATHER SAY TO REFER IT TO NEAREST SERVICE STATION THAT WILL GIVE YOU A VERY BEST SOLUTION REGARDING YOUR PROBLEM,.........

 

Bosnjak,, you must not work on your car??? dah??????????

 

I would think there would be an adjustment at the top of the light like the stock ones.

 

There should be some factory headlight adjustment **** that you can play with to get the aim higher. Also, if you're looking for even more light, try out a more intense halogen bulb from Sylvania Silverstar Ultra light bulbs. They'll make a big difference over any factory halogen bulb!

Shane

 

https://mustangforums.com/forum/4-6l...ght-beams.html

Here's where the vertical adjustment is for your headlights. From experience, do not over turn them or they WILL break. If the are still too low after adjusting them up all the way you may need to pull the headlights out out and shim/bend the appropriate mounting point it to get the light at the level where it should be.

 

how are the raxiom lights at night?