General Tech Ask model specific questions in the appropriate category below. All other general questions within.

any info

Thread Tools
 
Search this Thread
 
Old 12-29-2005, 09:22 PM
  #1  
sparxter
Thread Starter
 
sparxter's Avatar
 
Join Date: Dec 2005
Posts: 4
Default any info

i don't realy know where to post this so i'll try here. I have a 68 coupe and am interested in swaping the guts from a 04 cobra into it.harness ecu trany etc. I know i'll have to do alot of munipulating of the floor board for that monsterous t56 however the idea of fuel injection leaves this carb crap for the birds .basically my question is does any one know where i can get any articals about this swap or have any sugestions?
sparxter is offline  
Old 12-30-2005, 01:36 PM
  #2  
Tim37
4th Gear Member
 
Tim37's Avatar
 
Join Date: Sep 2005
Location: AR
Posts: 1,925
Default RE: any info

ya might want to break out a measuing stick and make sure that dohc 4.6l is gonna fit between the shock towers on that 68. if it will your best bet is to find a wrecked cobra and start swaping parts you will have to figure out the gass tank and all of that but it shouldn't be that bad.
Tim37 is offline  
Old 12-30-2005, 09:39 PM
  #3  
sparxter
Thread Starter
 
sparxter's Avatar
 
Join Date: Dec 2005
Posts: 4
Default RE: any info

iv'e allready checked on the shock towers and a mustang two suspension would allow me to get rid of the towers its front clearance for raidiator and air to air cooler as well as how much of the floor board i'll have to tear up for the t56
sparxter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
folivier
Tennessee Regional Chapter
4
10-02-2015 05:32 AM
RCS02v6
New Member Area
4
09-29-2015 01:46 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
GLOCKer
General Tech
0
09-28-2015 07:36 AM
ThatJuanStang
V6 (1994-2004) Mustangs
4
09-25-2015 08:01 AM



Quick Reply: any info



All times are GMT -5. The time now is 07:21 PM.