General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Fox body resto info

Thread Tools
 
Search this Thread
 
Old Feb 23, 2006 | 04:28 PM
  #1  
Tig's Avatar
Tig
Thread Starter
 
Joined: Feb 2006
Posts: 38
From: NC
Default Fox body resto info

Whats up,
I'm lookin at a 92 Notch, its in all around good condition. But, its been sitting for quite a while (for at least 4 months). I am lookin into restoring it, not necassarilly factory but would like to bring it back to life. The body is in fair condition(minus the bad paint job), the driver s door does make some noise when you open it (I would say it was in an accident), the whole undercarriage is pretty rusty, didnt get a good look at the floors yet (it was dark). The motor sounds strong it was built, it supposedly has about 390 or so rwhp.
Are there companies that carry replacement body panels, floor kits, interior panels and weather stripping. Any and all info would be much appreciated.

Thanks
Tig
Old Feb 23, 2006 | 04:35 PM
  #2  
Tim37's Avatar
Tim37
4th Gear Member
 
Joined: Sep 2005
Posts: 1,925
From: AR
Default RE: Fox body resto info

http://www.latemodelrestoration.com/...t_50_home.aspx

that would be a good place to start.
Old Feb 23, 2006 | 08:28 PM
  #3  
Tig's Avatar
Tig
Thread Starter
 
Joined: Feb 2006
Posts: 38
From: NC
Default RE: Fox body resto info


Thanks Tim, I appreciate it. I have allready been on that site for about an hour.

Later
Old Feb 25, 2006 | 10:10 AM
  #4  
GaMustanger's Avatar
GaMustanger
 
Joined: Feb 2006
Posts: 4
Default RE: Fox body resto info

try looking at foxbodyresto.com, I got a fox and thats where I go.
Old Feb 25, 2006 | 10:35 AM
  #5  
Tig's Avatar
Tig
Thread Starter
 
Joined: Feb 2006
Posts: 38
From: NC
Default RE: Fox body resto info


Thanks GaMustanger, I will check it out.

Old Feb 25, 2006 | 12:49 PM
  #6  
stanglx2002's Avatar
stanglx2002
6th Gear Member
 
Joined: Feb 2005
Posts: 5,205
From:
Default RE: Fox body resto info

50resto.com is the best place for 5.0 resto parts
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
UrS4
S197 Handling Section
10
Oct 3, 2015 06:23 AM
AMAlexLazarus
AmericanMuscle.com
0
Oct 1, 2015 10:29 AM
RCS02v6
New Member Area
4
Sep 29, 2015 01:46 PM
GLOCKer
General Tech
0
Sep 28, 2015 07:36 AM
2poor4u2
V6 (1994-2004) Mustangs
1
Sep 26, 2015 11:08 AM




All times are GMT -5. The time now is 10:19 AM.