Chevy or Ford?????
#81
RE: Chevy or Ford?????
ORIGINAL: *bmxking*
i just want to say that truck is far from stock.. because i dont know of too many stock truck running the quarter in 12.8... i could be wrong but i shur that truck would be more than i would want to pay... plus u could'nt pay me to drive a chevy
i just want to say that truck is far from stock.. because i dont know of too many stock truck running the quarter in 12.8... i could be wrong but i shur that truck would be more than i would want to pay... plus u could'nt pay me to drive a chevy
My Z-71 ran 14.8 Stock 5800 LB Race Weight 285 hp @ 5200 rpm 325 lb.-ft. torque @ 4000 rpm
Stock Dodge 12.6@106mph is the best I've heard of for a stock SRT/10... SRT10 QCSB run mid to high 13s at my track.
Now the Ford Lightnings are fast but they also handle great. This is where GM will run into problems.
Super charger or no supercharger GM has nothing to compete with. Ford has proved they can get more horse power from the 5.4. Ever heard of a Cobra R, that spanks z06 corvettes. The cobra R is advertised at 385 hp and dynoes at 377.
Here is a guy running 12.3 with a Supercharger. http://www.fatalfoo.com/F8L%20Z71.htm
I am sorry Mr. Samuel P Grimes, but Stock for Stock, If I were to drive both cars in a race (so not to be a drivers race)
these cars are a match (I think the Mustang may take the camaro by a car length)
the camaro has a little more HP but it's heavier.
Manufactures Specs............................................. ..............
1998-2002 Chevrolet Camaro Z-28
Displacement 5.7L/350 cu. in.
SAE Net Horsepower 305 @ 5200
SAE Net Torque (lb ft) 335 @ 4000
Base Curb Weight (lb) 3600
0 to 60 mph 5.3 sec
1/4 mile (E.T.) 13.7 sec
2005 Mustang GT
Displacement 4.6L/281 cu. in.
SAE Net Horsepower 300 @ 5750 rpm
SAE Net Torque (lb ft) 320 @ 4500 rpm
Base Curb Weight (lb) 3450 lbs.
0 to 60 mph 5.2 sec
1/4 mile (E.T.) 13.4 sec
#82
RE: Chevy or Ford?????
Wow I just wasted a ton of time on this looser [sm=headbang.gif]
Even his fellow forum members think he's a looser......
http://www.camaroforums.com/m_13179/...g/tm.htm#13327
Woohoo These Guys restore my Faith in Chevy Fans.......
[sm=americanasmiley.gif] LMAO
Even his fellow forum members think he's a looser......
http://www.camaroforums.com/m_13179/...g/tm.htm#13327
wait a second z284u2nv...
you waste your time surfing Mustang forums... sounds like someone's in the closet...
Seriously, you go on and on about the mods to your car, but you haven't done them yet? And to top it off, you don't even know how to do the mods? You need someone to come hold your hand and do the work for you... the work you are asking about is basic backyard mechanic stuff...
Maybe you should be on the import forums... you're just another cut-spring, fart-pipe, hot-rod wannabe.
you waste your time surfing Mustang forums... sounds like someone's in the closet...
Seriously, you go on and on about the mods to your car, but you haven't done them yet? And to top it off, you don't even know how to do the mods? You need someone to come hold your hand and do the work for you... the work you are asking about is basic backyard mechanic stuff...
Maybe you should be on the import forums... you're just another cut-spring, fart-pipe, hot-rod wannabe.
Hey.......sunshine, I'm ready to race you NOW. I'm downtown.....where are you? I've seen some of the sh*ttalkin' handy work you've been puttin in on Ford sites. So, I'm calling you out. Where in Dallas are you? When you wantta go? I think you've been beating up on V6 mustangs too much lately.......maybe a good dose of REAL American muscle will shake you back into reality. My Boss is waiting, whenever you're ready.
P.S. You're gonna need something more than that 150 shot to help you. I sincerely hope you have another stage laying around in your daddy's garage that he can slap in for you. Oh, and an LS1 swap wouldn't hurt either....
Also.....maybe some bigger gears............shoot, dude.....I think YOU'RE the one that needs a few more months of work on your car to make it decent. I've got a few LS1 buddies who would straight laugh at your butt even after all those mods go in. But don't worry, they've all agreed to conceil their laughter when you get stripped by my Boss.
Anytime now.....
(in reply to z284u2nv)
P.S. You're gonna need something more than that 150 shot to help you. I sincerely hope you have another stage laying around in your daddy's garage that he can slap in for you. Oh, and an LS1 swap wouldn't hurt either....
Also.....maybe some bigger gears............shoot, dude.....I think YOU'RE the one that needs a few more months of work on your car to make it decent. I've got a few LS1 buddies who would straight laugh at your butt even after all those mods go in. But don't worry, they've all agreed to conceil their laughter when you get stripped by my Boss.
Anytime now.....
(in reply to z284u2nv)
That's odd... according to your posts on another website, you have all this installed and are ready to kick anyones a$$, in fact you said you'd send the money to us to come out and race you?
(in reply to z284u2nv)
(in reply to z284u2nv)
#83
RE: Chevy or Ford?????
ORIGINAL: 2k05gt
Sam... What is your sister sticking up her nose......
Http://www.myspace.com/samuel83
Sam... What is your sister sticking up her nose......
Http://www.myspace.com/samuel83
#85
RE: Chevy or Ford?????
so..... you want us to stop wasting money when you dumped all that into an LT1? nobody here has any disrespect for the LS1 (and btw, that truck was heavily modded. Ive seen a bus do wheelies (and so have u if ur familiar with streetfire) anything is possible with money dumbass) also, the 4.6 3-valve responds to mods as well as the LS1, and they arent taking much to keep up. I know a guy who put down 304 to the wheels with a TB, intake, and custom dyno tune. if you dont believe me ask MusicCityGT. its his car. So you just go ahead and rant about how much better GM is (that must be why the company is doing so well right now right? (dumbass)) and let ur video speak for you (somehow..... none of us have really figured out how ur many angles show us GMs superiority).
Im going with the "GM lovin daddy" on this one. the kid doesnt have a single idea of what he is talking about (proof in that he thought he could pass that crappy video off as any kind of evidence.... none too bright there chuck) and is probably quoting specs from the internet about "his" car.
Im going with the "GM lovin daddy" on this one. the kid doesnt have a single idea of what he is talking about (proof in that he thought he could pass that crappy video off as any kind of evidence.... none too bright there chuck) and is probably quoting specs from the internet about "his" car.
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
21
04-04-2020 02:16 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
2
09-02-2015 07:54 AM