Supercharger question
#1
Supercharger question
Is there a super charger on the market that will allow me to keep my shaker hood? Also not related to super chargers, what axle back exhaust do you guys reccommend? And finally 3.73's or 3.90's.
'07 GT Auto, cold air kit, shaker hood
'07 GT Auto, cold air kit, shaker hood
#2
RE: Supercharger question
ORIGINAL: Ghostrider4918
Is there a super charger on the market that will allow me to keep my shaker hood? Also not related to super chargers, what axle back exhaust do you guys reccommend? And finally 3.73's or 3.90's.
'07 GT Auto, cold air kit, shaker hood
Is there a super charger on the market that will allow me to keep my shaker hood? Also not related to super chargers, what axle back exhaust do you guys reccommend? And finally 3.73's or 3.90's.
'07 GT Auto, cold air kit, shaker hood
I've seen guys modify the shroud on the shaker to work with centri superchargers, but I doubt it retains any functionality.
Axle back: I won't recommend. You have to hear the different options and decide for yourself. (Youtube has plenty of clips.) Exhaust note preference is completely subjective.
Rear gears: If you do go with a centri, I'd say 4.11s. (Despite popular opinion, the difference in gas mileage between 3.73s and 4.11s is negligible.) If you end up opting for a twin screw, you'll discover that anything lower than stock is nearly unstreetable on street tires.
#3
RE: Supercharger question
centri blowers will allow u to keep the shaker and have it functional. With a TS you can keep it(you'll have to modify it more than with a centri) but it really cant be functional from what I've seen
with an auto tranny most have been successful with 3.73s
btw the 8.8 in our cars take 4.10s - not 4.11s
with an auto tranny most have been successful with 3.73s
btw the 8.8 in our cars take 4.10s - not 4.11s
#6
RE: Supercharger question
ORIGINAL: Stkjock
btw the 8.8 in our cars take 4.10s - not 4.11s
btw the 8.8 in our cars take 4.10s - not 4.11s
#8
RE: Supercharger question
ORIGINAL: nineinchnail1024
Most companies market them as 4.10s, but 4.11s are available as well. Yukon Gear makes a 4.11 kit for ford 8.8 inch rear ends.
ORIGINAL: Stkjock
btw the 8.8 in our cars take 4.10s - not 4.11s
btw the 8.8 in our cars take 4.10s - not 4.11s
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
09-28-2015 07:03 AM