RE: Forged Rotating Kit - DIY?
HP = a lot of coin $$ !! lots of suporting mods everywhere[&:] (learned that recently lol ....)
|
RE: Forged Rotating Kit - DIY?
mustanghobby, do you think this kit is
the one for our engines and for our goals phatphil, i'll definately do a write up after the fact, maybe periodic updates as well |
RE: Forged Rotating Kit - DIY?
yes, but i'm drawing the line after
the rotating assembly, tensioner, 8 rib kit, and clutch kit ORIGINAL: MexGT HP = a lot of coin $$ !! lots of suporting mods everywhere[&:] (learned that recently lol ....) |
RE: Forged Rotating Kit - DIY?
ORIGINAL: hammeron yes, but i'm drawing the line after the rotating assembly, tensioner, 8 rib kit, and clutch kit ORIGINAL: MexGT HP = a lot of coin $$ !! lots of suporting mods everywhere[&:] (learned that recently lol ....) |
RE: Forged Rotating Kit - DIY?
hmm..I've built several 302's in the past but I'm weary of the ohc in these cars. You do raise questions though. Is there a handbook out there with the 3v breakdown in it?
|
RE: Forged Rotating Kit - DIY?
blue, i really just want to install the
rotating assy, then bolt my heads back on, no fuss no muss.... does anyone see a reason that this plan won't work |
RE: Forged Rotating Kit - DIY?
I would not just throw that assemblyin there. You should have the block hot-tanked, freez plugs replaced, check the deck for trueness, balance rotating assembly and more. What about new head gaskets and ARP studs for the heads? Can you mic out the crank and main bearings/rod bearings to ensure proper clearance? If you know how to blueprint an engine then you should be okay.
|
RE: Forged Rotating Kit - DIY?
ORIGINAL: hammeron blue, i really just want to install the rotating assy, then bolt my heads back on, no fuss no muss.... does anyone see a reason that this plan won't work |
RE: Forged Rotating Kit - DIY?
maybe i am biting off more
than i can chew.... but can't a guy try to save some moolah and learn something in the process.... |
RE: Forged Rotating Kit - DIY?
doesn't look good then :)
ORIGINAL: zkiller If you know how to blueprint an engine then you should be okay. |
All times are GMT -5. The time now is 10:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands