Notices
GT S197 General Discussion This section is for technical discussions pertaining specifically to the V8 variation of the 2005 and newer Ford Mustang.

Flowmaster "classic" axlebacks

Thread Tools
 
Search this Thread
 
Old 09-16-2009, 04:34 PM
  #1  
yellowjohn1
Thread Starter
 
yellowjohn1's Avatar
 
Join Date: Aug 2009
Location: Missouri
Posts: 38
Default Flowmaster "classic" axlebacks

Still trying to make up my mind on what axlebacks I am going to get. Was debating between Mac's, Boomtubes and the new "classic" Flowmasters. For someone who has heard these in person, do they sound good? I really don't like the original American Thunders they came out with for the 3v. Supposedly they are supposed to be close to the old foxbody sound. thanks for your input.
yellowjohn1 is offline  
Old 09-16-2009, 04:46 PM
  #2  
onederful100
6th Gear Member
 
onederful100's Avatar
 
Join Date: Jul 2007
Location: Honolulu, HI
Posts: 6,130
Default

have not heard the classic dronemaster, i mean flowmasters on the s197 in person.
but the boomtubes sound good. midmufflers are good too.
and if you are trying to duplicate the fox body sound in an s197, forget it. the only way I found to get the fox body sound was to buy a fox body. lol.
onederful100 is offline  
Old 09-17-2009, 01:57 PM
  #3  
KcMstang
2nd Gear Member
 
KcMstang's Avatar
 
Join Date: Jan 2009
Location: Georgia
Posts: 343
Default

I didn't like my chambered Magnaflow as first but now that I have long tubes and o/r hpipe they sounds great. Exhaust is very deep sounds and intimidating. Not to mention I also have cams installed! MACs sounds great also, haven't heard the new flowmasters...I don't like the company name...flowmaster, shows like a toilet company!
KcMstang is offline  
Old 09-17-2009, 02:02 PM
  #4  
1ATony
Former Sponsor
 
1ATony's Avatar
 
Join Date: Jul 2009
Location: NH
Posts: 1,714
Default

I haven't heard the boom tubes but the MAC flowpaths for the fox's sound sick,no drone either.
1ATony is offline  
Old 09-17-2009, 08:22 PM
  #5  
AKRA
1st Gear Member
 
AKRA's Avatar
 
Join Date: Nov 2008
Location: Michigan
Posts: 117
Default

I have the Pypes mid muffler exhaust and I am pleased with the sound and performance. The only issue was the poor fitment.

I had a muffler shop install them because of the following issues:
1) One of the pipes the needed heating up and bending
2) One pipe was longer than the other and had to be cut
3) Replaced clamps because there's were junk.

But after a little TLC and a desire to make it right it's
a nice setup. All stainless pipes with stainless mid mufler glasspacks.

Best of luck,

Al
AKRA is offline  
Old 09-17-2009, 10:30 PM
  #6  
thewarmachine
5th Gear Member
 
thewarmachine's Avatar
 
Join Date: Apr 2007
Location: North Carolina
Posts: 3,070
Default

I haven't heard the new Flow classics in person, but every vid I have heard sounds great. I'd go for it. The thing that helped my car's sound the most was BBK shorty headers.
thewarmachine is offline  
Old 09-18-2009, 03:12 PM
  #7  
brad281
4th Gear Member
 
brad281's Avatar
 
Join Date: Mar 2007
Posts: 1,249
Default

No absolute way do our 3 valves sound anywhere near a fox. Or even the great sound of a new edge with a o/r prochamber and original flowmasters.
Out of your selection, I would go with the macs.
brad281 is offline  
Old 09-19-2009, 05:53 PM
  #8  
DanielKSpencer
2nd Gear Member
 
DanielKSpencer's Avatar
 
Join Date: Aug 2009
Location: VA/NC Line
Posts: 405
Default

The classics have much more drone than the regular flows. I thought it was too much for my taste. I don't know if I trust the flows anymore after all the talk of the welds comming loose in them and making a rattle anyway.
DanielKSpencer is offline  
Old 09-20-2009, 05:18 PM
  #9  
mdg
4th Gear Member
 
mdg's Avatar
 
Join Date: Aug 2006
Location: Northern Virginia
Posts: 1,968
Default

Boomtubes!!
mdg is offline  
Old 09-20-2009, 07:23 PM
  #10  
SirKnightTG
5th Gear Member
 
SirKnightTG's Avatar
 
Join Date: Mar 2007
Location: Deep in the <3 of Tx
Posts: 3,925
Default

Originally Posted by mdg
Boomtubes!!

+1.
SirKnightTG is offline  


Quick Reply: Flowmaster "classic" axlebacks



All times are GMT -5. The time now is 11:56 PM.