I pulled a 2007 power seat from a mustang GT to install in my 2005 mustang GT convertible. The part # on the harness that I pulled from the 2007 is 7R3T-14A576-DAB. The end of the power seat harness is black and is 1-3/4" wide by 3/4" height. The main harness in my 2005 is grey and 3/4" by 1". The wire harness on the drivers side power seat reads 5R3Z-14A699-BA. So I ordered a wire harness from ford for the passenger power seat for a 2007 and the part # on the box is 7R3Z-14A699-DA, which from my research on this forum is correct for 2005-2008. But the part # on the harness that came out of said box is 7R3T-14A576-DAB -- same as what was on the seat track I originally pulled from the
2007. So this will not work. How can I get a harness to work for my car? Any suggestions? Thanks, Steve