TX007

Anyone removed them yet, if so do they have posts that go into the fender or are they double-side tape only?
The rear GT Trunk piece is double-side type only right?

THANKS

TX007

TESTing does my signature work?

hawgman

The GT emblems on the fenders have two locator pins and double sided tape. The faux gas cap emblem in the rear also has locator pins.

TX007

Lets try again, hello signature??

TX007

Thanks for the info, considering changing out the emblems, didn't know how much of a "pita" it would be.

praztek

Deleted Post.

Gonzo71

Anybody know a good source for decent badges/emblems (non-plastic)?

TX007

Try these:
1. http://www.mgwltd.com/mustang_2005-present.shtml (Nice Chromed Trim Pieces)

2. http://www.metropartsmarket.com (old school Shelby and Cobra Emblems)

hawgman

The fender emblems are no big deal to change out.
In addition to the links TX007 posted, you can also find some here

I put these on mine a while back

emt4fire1951

I just replaced the factory F150 emblems on my 06 truck with a set of HarleyF150's off Ebay. $80.00 beats an extra 5000 any day. Just used a hair dryer and popped the emblems off, used my thumb to roll off excess stickey tape and after trying lots of different solvents good old gasoline did the trick. (fer cripes sake be careful no open flames or crazy uncle joe with his cigar, don't store soaked rags on or with anything let em dry out so wont combust - sorry firefighter for 26 years) No smudges or stains. New emblems were metal and went on great. Looks like the GT's emblems are attached the same. Good luck.