Hey guys i have a 2003 mach1 and i dont know what to do next. my mods as of now are:
Built motor 10.5:1 compression
crower stg 2 cams.
Stage 1 heads
Full boltons minus a TB
Nitrous stand alone fuel system
Running a 200 shot
Built trans
Built rearend with 4.10s
Twin Cobra fuel pumps with a KB BAP.
my suspension has drag spring HPM mega bite Jr. lower CA and Upper CA
I am wanting to do something that will help the car out. i was thinking about porting the intake manifold but not sure who does them. Or maybe geting my heads fully ported and maybe bigger cams. i am just not sure what to do... so if yall have any ideas that would be great!!!

 

hehe...i got some ideas for you, BUT they're pricey.
an intake spacer will give you HUGE TQ gains on your 200 shot $100
fr500 cams or ford gt cams $1200
fr500 intake ~$2000
with your built motor and 200 shot a 8500 rpm screamer would be SICK!!

 

put and F1a on it

 

Darn dude...you got it going on! If keeping it n/a you might as well maximize the air/fuel by porting the intake, get the TB, TB spacer, and a Cobra/Lightning MAF. Mind if I ask what you run in the 1/4 mi.?

 

only been to the track one and i ran a 11.20 at like 117ish then i got kicked out for not haveing a cage and some other small stuff. that was on a 125 shot.

 

have links to the intake spacer?
and does anyone know who does the intake porting i cant remember his name?

 

send a PM to RoyC on here or just Roy over on M1R he has everything you'll need for 100 buck including hardware.

Also you'll need to go to Svtperformance and hit up NAzMan there... master at P/P he had a 451rwhp 99 cobra N/A that HE built.