My 1979 Mustang Cobra
#1
My 1979 Mustang Cobra
Just took some pictures, heres a few,
A vid, before tail pipes and before we lowered the Idle,
http://www.youtube.com/watch?v=Nyz2oJVZYaI
Mod list (mod list and link to build thread in video descrip)
302 block, bored.. .010 to freshen up the cylinders.
New piston rings
New bearings in the bottom end,
E-303 Cam.
AFR 165''s non emission legal
Edelbrock RPM Air Gap intake.
Holley 4BBL 670 Street Avenger carb.
BBK Long tubes.
BBK O/R H pipe
Dynomax Bullet mufflers
Comp Cams Ultra Gold Roller Rockers.
Trick flow hardned push rods for the rockers.
160*F Thermostat.
MSD Distributor.
MSD 6AL Box.
MSD Blaster 2 Coil.
Centerforce Dual Friction clutch.
3.73 Gears.
Make sure to click view in high quality on the video
A vid, before tail pipes and before we lowered the Idle,
http://www.youtube.com/watch?v=Nyz2oJVZYaI
Mod list (mod list and link to build thread in video descrip)
302 block, bored.. .010 to freshen up the cylinders.
New piston rings
New bearings in the bottom end,
E-303 Cam.
AFR 165''s non emission legal
Edelbrock RPM Air Gap intake.
Holley 4BBL 670 Street Avenger carb.
BBK Long tubes.
BBK O/R H pipe
Dynomax Bullet mufflers
Comp Cams Ultra Gold Roller Rockers.
Trick flow hardned push rods for the rockers.
160*F Thermostat.
MSD Distributor.
MSD 6AL Box.
MSD Blaster 2 Coil.
Centerforce Dual Friction clutch.
3.73 Gears.
Make sure to click view in high quality on the video
#4
Probably going to cut the springs since we have a spare set.
And fuzzy, new exhaust video, this ones with tailpipes,
http://www.youtube.com/watch?v=HsPGeW0C4UA
And fuzzy, new exhaust video, this ones with tailpipes,
http://www.youtube.com/watch?v=HsPGeW0C4UA