Mach 1 and 4.6 Parts
11-11-2009, 06:47 PM
#1
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128
Mach 1 and 4.6 Parts
Updated list 11/25
I have some mach engine stuff forsale from doin an eaton swap for my buddie.
Also some other stuff I have got layin around in the way. About to join the Airforce so I need to get rid of this stuff soon. I am not sure what this stuff is worth so shoot me a resonable offer I will take it. Don't need this stuff taking up space in my garage anymore.
All these parts came off a 2004 Mach with 24k miles on it. Except the engine below.
Termi Rods and Block left. Block is flawless one rod had a bearing spun. $150 for each
4.6 cast rods $25
Complete 4.6 DOHC intake Upper and Lower $275 OBO
Coolant Crossover tube $35 OBO
Crank Balancer for manual $35
Throttle Body $45
Stock Mach MAF $50
Stock mach fuel sump with pump and sending unit. $25
2 Altenators One with clutch one without $50
Throttle and Cruse Cable Bracket
Cast 4.6 Crank shaft perfect condition 24k miles $75 OBO
24lb ev6 injectors 24k on them $50 OBO
Almost Complete Shaker setup $200 OBO
I have some other misc parts such as Idle air controls egr stuff if you are in need of any of this stuff let me know I will see if I have it.
Also have two shaker setups. Everything but the tops from doin eaton swaps. One I will part out the other I am gonna sell as a set.
Also have a new never used 8 rib conversion kit for anyone with a cent. blower on a 4.6 gt, mach or cobra. This kit works with both Vortech kits and Procharger kits. Includes and Reichard Racing Ultra Grip 20lb pulley. $400 for all of it
Any questions or if you need pictures let me know I will email them per need.
Thanks
Jeremy
I have some mach engine stuff forsale from doin an eaton swap for my buddie.
Also some other stuff I have got layin around in the way. About to join the Airforce so I need to get rid of this stuff soon. I am not sure what this stuff is worth so shoot me a resonable offer I will take it. Don't need this stuff taking up space in my garage anymore.
All these parts came off a 2004 Mach with 24k miles on it. Except the engine below.
Termi Rods and Block left. Block is flawless one rod had a bearing spun. $150 for each
4.6 cast rods $25
Complete 4.6 DOHC intake Upper and Lower $275 OBO
Coolant Crossover tube $35 OBO
Crank Balancer for manual $35
Throttle Body $45
Stock Mach MAF $50
Stock mach fuel sump with pump and sending unit. $25
2 Altenators One with clutch one without $50
Throttle and Cruse Cable Bracket
Cast 4.6 Crank shaft perfect condition 24k miles $75 OBO
24lb ev6 injectors 24k on them $50 OBO
Almost Complete Shaker setup $200 OBO
I have some other misc parts such as Idle air controls egr stuff if you are in need of any of this stuff let me know I will see if I have it.
Also have two shaker setups. Everything but the tops from doin eaton swaps. One I will part out the other I am gonna sell as a set.
Also have a new never used 8 rib conversion kit for anyone with a cent. blower on a 4.6 gt, mach or cobra. This kit works with both Vortech kits and Procharger kits. Includes and Reichard Racing Ultra Grip 20lb pulley. $400 for all of it
Any questions or if you need pictures let me know I will email them per need.
Thanks
Jeremy
Last edited by kevman41635; 11-25-2009 at 09:10 AM.
11-14-2009, 09:51 PM
#2
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128
Bump
All still for sell
All still for sell
11-15-2009, 06:45 AM
#3
2nd Gear Member
Join Date: Aug 2006
Location: Virginia , Ohio
Posts: 171
can you send me some pics of the crank 8 or 6 bolt?(also romeo or winsdor crank?)
Also are you willing to split the rotating assembly if so how much for the forged crank?
Also are you willing to split the rotating assembly if so how much for the forged crank?
11-15-2009, 11:26 PM
#4
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128
Here are some pictures of the engine their is some anti rust coating sprayed down in the cylinders to keep it from rusting that is the film in them. It is an 8 bolt crank this engine is romeo out of an 04 terminator.
11-17-2009, 06:31 PM
#6
4th Gear Member
Join Date: Nov 2006
Location: TN
Posts: 1,045
Interested in 8rib conversion. Can you post or email some pics to rootlessroom@gmail.com
much appreciated.
Luke
much appreciated.
Luke
11-19-2009, 02:43 AM
#7
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128
Bump still for sell
11-22-2009, 03:49 AM
#8
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128
Bump Lower Prices need to sell this stuff Takin offers on all of it.
11-22-2009, 06:34 AM
#9
2nd Gear Member
Join Date: Aug 2006
Location: Virginia , Ohio
Posts: 171
Pm you on the crankshaft ill take it.
11-22-2009, 08:47 AM
#10
1st Gear Member
Thread Starter
Join Date: Jan 2006
Location: Kentucky
Posts: 128