new here... sayin hi.
07-13-2008, 12:33 PM
#1
1st Gear Member
Thread Starter
Join Date: Jul 2008
Posts: 98
new here... sayin hi.
Im a new member and I just wanted to say hi. Im in newnan, GA and I drive a 1994 GT. heres a pic.
347 stroker w GTP heads, Cobra upper and lower intakes, X303 cam, Ford Motorsport roller rockers, 70 mm throttle body, 70 mm mass air, Ford Motorsport 9mm wires, MSD cap, Accel coil, cold air kit w K&N, Ford Motorsport ceramic coated stainless shortys, 3" MAC pro chamber, 3" 1 chamber flowmasters and turndowns, kingcobra clutch, pro 5.0 shifter, aluminum driveshaft, 3.73 gears, all tubular control arms in rear, eibach springs, swaybars, rack offset bushings.
future plans include upgrading the ignition system (other than that the engine is done... all the power Ill ever need) , adding a full saleen kit w double wing, running my turn downs out the rear (if I can run 3" over the axle), a set of racing seats w harnesses, a 4 point rollbar, strut tower brace, camber plates and bumpsteer kit, 98 cobra tail lights and a few little things here and there.
347 stroker w GTP heads, Cobra upper and lower intakes, X303 cam, Ford Motorsport roller rockers, 70 mm throttle body, 70 mm mass air, Ford Motorsport 9mm wires, MSD cap, Accel coil, cold air kit w K&N, Ford Motorsport ceramic coated stainless shortys, 3" MAC pro chamber, 3" 1 chamber flowmasters and turndowns, kingcobra clutch, pro 5.0 shifter, aluminum driveshaft, 3.73 gears, all tubular control arms in rear, eibach springs, swaybars, rack offset bushings.
future plans include upgrading the ignition system (other than that the engine is done... all the power Ill ever need) , adding a full saleen kit w double wing, running my turn downs out the rear (if I can run 3" over the axle), a set of racing seats w harnesses, a 4 point rollbar, strut tower brace, camber plates and bumpsteer kit, 98 cobra tail lights and a few little things here and there.
Thread
Thread Starter
Forum
Replies
Last Post