New Member in Central Florida
11-20-2009, 11:33 PM
#1
Thread Starter
Join Date: Nov 2009
Location: Florida
Posts: 2
New Member in Central Florida
My dad got a new vehicle and sold me his 2004 Mustang GT. The throwout bearing had gone when I received it but I replaced it. It was nice of the Haynes manual not to mention the top two bolts on the bellhousing.
Going through cleaning and working out all the kinks. It makes a clunk when I go from forward to reverse or vice versa. Going to have to crawl under there and check the transmission mount.
Here's a picture:
Going through cleaning and working out all the kinks. It makes a clunk when I go from forward to reverse or vice versa. Going to have to crawl under there and check the transmission mount.
Here's a picture:
11-21-2009, 10:10 AM
#7
Thread Starter
Join Date: Nov 2009
Location: Florida
Posts: 2
I like it. A lot better than my old car, 97 Pontiac Grand Am that was falling apart. Still getting used to driving a manual again. Haven't stalled it yet but I know I will eventually.
First thing I'm going to do is get it tinted. Sun is just too bright in Florida not to. Has some cosmetic damage that I'm going to look into fixing. Lovebugs have torn up the front bumper some.
In about a year or so I plan on throwing a computer and LCD touchscreen in. It has the Mach audio system so I shouldn't need to buy new amps.
First thing I'm going to do is get it tinted. Sun is just too bright in Florida not to. Has some cosmetic damage that I'm going to look into fixing. Lovebugs have torn up the front bumper some.
In about a year or so I plan on throwing a computer and LCD touchscreen in. It has the Mach audio system so I shouldn't need to buy new amps.
