I have a 67 coupe on which I am doing a complete restoraion. As part of the job I am building a digital lighting controler that will bypass the turn signal and 4 way flashers and power the sequential turn signals and 4 way while letting the brake lights, come on all at one time. like they are suposed to do unlike the plug and play version anyone can install. This however requires I run some additional wiring and tap into the turn signal and 4 way harness. I am looking to do this without cutting and splicing the exsisting harness. to do so I need two items. 1 the connector at the end of the turn signal switch wiring and 2 the connector that it plugs into under the dash. each connector needs to be like a pigtail with 4 to 6 inches of wire still attached. I intend to turn these around and make a wedge connector that can simply plug into my exsisting connectors to eliminate the above mentioned cutting and splicing. if you can supply these item please let me know via email. dpatton58@yahoo.com. thanks