Performance Heads, Balancer, Converter, + more
11-30-2006, 07:21 PM
#1
3rd Gear Member
Thread Starter
Join Date: Nov 2005
Location:
Posts: 666
Performance Heads, Balancer, Converter, + more
Hi I listed this stuff awhile back but didnt have a digital camera... I have pics now. Make me a reasonable offer and its yours.
* Slighty Ported E7's With Fresh Valve Job
Have about 100 miles since new valve job($350) Also had them flat milled (.020") to raise compression. The Intakes and Exhaust ports were gone over and casting marks and flaws were taken out to flow better. Also Just had Everything tanked, glassbeaded, and got new seals. Springs set up for .500 lift max.
http://i96.photobucket.com/albums/l1...P1010270-4.jpg
http://i96.photobucket.com/albums/l1...5/P1010272.jpg
http://i96.photobucket.com/albums/l1...P1010273-1.jpg
http://i96.photobucket.com/albums/l1...5/P1010274.jpg
http://i96.photobucket.com/albums/l1...5/P1010275.jpg
* Dacco Aode/4R70W 2300-2500 Stall Converter
Go to http://www.daccoperformance.com for all specs. Cost $400 new with less than 1000 miles on it. Mint condition.
http://i96.photobucket.com/albums/l1...P1010270-3.jpg
* FRPP Hydraulic Roller Lifters
Have Low miles on them, excellent condition with no signs of wear. Only stopped using these because I got a new set with my new cam kit for the bigger motor.
http://i96.photobucket.com/albums/l1...P1010270-5.jpg
http://i96.photobucket.com/albums/l1...P1010271-2.jpg
* FRPP 50 oz Balancer
Mint Condition. Only reason for getting rid of is because my stroker motor is 28oz balanced. No needfor it anymore.
http://i96.photobucket.com/albums/l1...P1010270-1.jpg
* FRPP 50 oz Flexplate for Auto.
Good condition all teeth are in great shape and not rounded. Same reason for selling my motor is 28 oz and no longer need this.
http://i96.photobucket.com/albums/l1...5/P1010273.jpg
* Denso 19# injectors[8] ->STOCK
Here is a stock set of injectors that are in good condition. Used for 50k. Have new orings to go along with them. However you will need to buy the plastic caps which are a couple dollars at autozone.
http://i96.photobucket.com/albums/l1...5/P1010270.jpg
http://i96.photobucket.com/albums/l1...5/P1010271.jpg
* 2005 KX 125 Mod Motocross Bike
thought I'd see if anyone had any interest. Must Go. Mint for a race bike.
Email for my pics and a list of mods.
http://i96.photobucket.com/albums/l1...P1010272-1.jpg
Let me know if you have any questions or whatnot. Pm me guys all stuff must go so I can list more things.
* Slighty Ported E7's With Fresh Valve Job
Have about 100 miles since new valve job($350) Also had them flat milled (.020") to raise compression. The Intakes and Exhaust ports were gone over and casting marks and flaws were taken out to flow better. Also Just had Everything tanked, glassbeaded, and got new seals. Springs set up for .500 lift max.
http://i96.photobucket.com/albums/l1...P1010270-4.jpg
http://i96.photobucket.com/albums/l1...5/P1010272.jpg
http://i96.photobucket.com/albums/l1...P1010273-1.jpg
http://i96.photobucket.com/albums/l1...5/P1010274.jpg
http://i96.photobucket.com/albums/l1...5/P1010275.jpg
* Dacco Aode/4R70W 2300-2500 Stall Converter
Go to http://www.daccoperformance.com for all specs. Cost $400 new with less than 1000 miles on it. Mint condition.
http://i96.photobucket.com/albums/l1...P1010270-3.jpg
* FRPP Hydraulic Roller Lifters
Have Low miles on them, excellent condition with no signs of wear. Only stopped using these because I got a new set with my new cam kit for the bigger motor.
http://i96.photobucket.com/albums/l1...P1010270-5.jpg
http://i96.photobucket.com/albums/l1...P1010271-2.jpg
* FRPP 50 oz Balancer
Mint Condition. Only reason for getting rid of is because my stroker motor is 28oz balanced. No needfor it anymore.
http://i96.photobucket.com/albums/l1...P1010270-1.jpg
* FRPP 50 oz Flexplate for Auto.
Good condition all teeth are in great shape and not rounded. Same reason for selling my motor is 28 oz and no longer need this.
http://i96.photobucket.com/albums/l1...5/P1010273.jpg
* Denso 19# injectors[8] ->STOCK
Here is a stock set of injectors that are in good condition. Used for 50k. Have new orings to go along with them. However you will need to buy the plastic caps which are a couple dollars at autozone.
http://i96.photobucket.com/albums/l1...5/P1010270.jpg
http://i96.photobucket.com/albums/l1...5/P1010271.jpg
* 2005 KX 125 Mod Motocross Bike
thought I'd see if anyone had any interest. Must Go. Mint for a race bike.
Email for my pics and a list of mods.
http://i96.photobucket.com/albums/l1...P1010272-1.jpg
Let me know if you have any questions or whatnot. Pm me guys all stuff must go so I can list more things.
11-30-2006, 09:04 PM
#2
Join Date: Jun 2006
Location: Elkton, Virginia
Posts: 41
RE: Performance Heads, Balancer, Converter, + more
will the balancer work on a stock 5.0?? I need a new balancer since mine has started to spin and go bad. Please let me know a price... at this time i'm interested.
12-01-2006, 06:03 PM
#4
Join Date: Jun 2006
Location: Elkton, Virginia
Posts: 41
RE: Performance Heads, Balancer, Converter, + more
I didnt recieve any emails so please send me a PM or something. I heard that the stock 5.0's are 50oz balanced so I am really interested. Please contact me asap or email me at remnanm@ntelos.net
12-04-2006, 01:27 AM
#7
Join Date: Jun 2006
Location: Elkton, Virginia
Posts: 41
RE: Performance Heads, Balancer, Converter, + more
Bump for a really good selller and a great guy. Lets help him get rid of this stuff.
He's selling this stuff for a really good deal. I'm buying the balancer for a great deal!!
He's selling this stuff for a really good deal. I'm buying the balancer for a great deal!!
