$1500 96-04GT Supercharger kit "how its done" - Page 39 - MustangForums.com


Pipes, Boost & Juice Talk about Exhaust, Nitrous, Blowers, Turbos, Superchargers... whatever makes you go faster!
Sponsored by:
Sponsored by:

Reply
 
 
 
Thread Tools Search this Thread
Old 05-17-2015, 04:01 PM   #381
zmarshall22
 
Join Date: May 2015
Location: Arkansas
Posts: 6
Default

Well I don't have the car yet. I'm getting it when I get back home from Basic Training. But I've already made a list of what I want to do and get. I'll show you what I've got so far and tell me if there's anything else you suggest I get with the list so that I don't screw my engine or anything up.
Here's the list:

Exhaust: MAC Long Tube headers, MAC Off-Road Pro Chamber Mid-Pipe

Engine: (1) SR Performance CAI & 75mm Throttle Body w/ Intake Plenum
(2) Trick Flow 390/375 Top End Engine Kit w/ 38cc Heads 2V
(3) Comp Cams Stage 4 Xtreme Energy XE27AH Camshafts (w/ 4.10mm Gears, Beehive Springs, Valve Spring Retainers)
(4) Vortech Supercharger 2V, V-3 Si-Trim Satin
(5) Spec Stage 2 Clutch (including Spec Flywheel, SR Performance Clutch Adjuster Kit)

Will this setup work fine? Also, I'm looking for a 2004 Mustang GT for sale too. Stock, preferably because I want this setup on the one I get. Also, I'd like to find somebody that has one for sale who will hold it for me until I get back from Basic Training. I am leaving in August if they have a spot open and will be back sometime in January.
zmarshall22 is offline   Reply With Quote
Old 05-17-2015, 04:04 PM   #382
zmarshall22
 
Join Date: May 2015
Location: Arkansas
Posts: 6
Default

Also, depending on my setup I replied with, will the pulley and 42lb injectors work? If not, then will the setup I created work?
zmarshall22 is offline   Reply With Quote
Old 02-03-2016, 11:54 PM   #383
 
Join Date: Feb 2016
Location: FL - Florida
Posts: 13
Default Forced induction route.

I have a Paxton Novi 1200, I'm contemplating selling to put money towards a KB blower or get a set of twins, What are you thoughts about this.
Elmo30086@gmail.com is offline   Reply With Quote
Old 03-14-2016, 08:18 AM   #384
serrano86
 
Join Date: Mar 2016
Location: California
Posts: 1
Default

I know this is a old forum but here I need opinions you guys think that a vortech v1 head unit, that needsounds to be rebuilt is a good buy for 200 bucks?
serrano86 is offline   Reply With Quote
Old 04-08-2016, 02:14 PM   #385
98snakehorse
 
98snakehorse's Avatar
 
Join Date: Dec 2014
Location: Iowa
Posts: 18
Default

Quote:
Originally Posted by serrano86 View Post
I know this is a old forum but here I need opinions you guys think that a vortech v1 head unit, that needsounds to be rebuilt is a good buy for 200 bucks?
Doesnt sound like too bad of deal, depending on what you get quoted to have the thing gone through and rebuilt.


On another note, I just purchased a v3 vortech kit for my 98gt with an 02PI engine. How many guys were able to use the factory maf for lets say 8lbs of boost? I already have a walbro 255 and 42lb injectors.
98snakehorse is offline   Reply With Quote
Old 03-24-2017, 12:24 PM   #386
Colbinator
 
Join Date: Mar 2017
Location: Washington
Posts: 1
Default Help

Do you have a blow off valve on the kit? And why the CAI, super chargers don't need one right? Also the kit instructions link doesn't work, I really want to do this, thanks!
Colbinator is offline   Reply With Quote
Old 05-11-2017, 01:15 AM   #387
MCollins14
 
Join Date: May 2017
Location: Florida
Posts: 1
Default

Quote:
Originally Posted by Soldier GT View Post
Couple questions:

Do you have the stock motor (bottom end-rods pistons etc.,)?

If so the 3.60 will do you fine. Vortechs have different pulleys sizes (3.60, 3.48, 3.33, 3.125, 2.87). If you still have the stock bottom end then I would suggest going with the 3.60 pulley or maybe even a 3.48. Anything smaller and you'll be running to much boost which would cost your motor to make to much HP which in turn can and will blow your engine. With a 3.60 pulley should be right at 380 or so to the wheels. A 3.48 pulley close to or a little over 400 anything smaller than that you're running a risk of blowing your engine.

You can run 42 lb injectors but you'll be like me and want to make more HP and will have to sell those and buy some more. I'll cut you a deal on the injectors (55 lb) and pulley. Let me know...


Also I am here to help you as much as I can. What all parts do you have so far?
Still got those injectors?
MCollins14 is offline   Reply With Quote
Old 06-16-2017, 12:26 AM   #388
mustang TOM
 
Join Date: Jun 2017
Location: virginia
Posts: 3
Default mustang TOM

I have a 2003 gt mustang with vortec 2 supercharger and performance intake runs great but gets hot any ideas??
mustang TOM is offline   Reply With Quote
Old 06-17-2017, 09:27 PM   #389
mustang TOM
 
Join Date: Jun 2017
Location: virginia
Posts: 3
Default OVERHEATING

Quote:
Originally Posted by Frostbitten View Post

SORRY DONT KNOW IF POSTING THIS RIGHT
I HAVE A 2003 GT MUSTANG SUPER CHARGER ETC ETC IT HAS A FRONT INTERCOOLER . HOW CAN I TELL IF INTERCOOLER WORKING ?? AND DO I ADD ANYTHING TO INTERCOOLER ?? CAME WITH CAR AND I DONT KNOW HAS ORIGINAL WATER PUMP DO I PUT NEW BETTER ONE ?? CAR RUNS AWESOME JUST OVERHEATS IT HAS NEW THERMOSTAT AND NEW HIGH PERFORMANCE FORD INTAKE P;LEASE HELP
MUSTANG TOM
mustang TOM is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
4 Valve Head questions GimpyHSHS 4.6L (1996-2004 Modular) Mustang 7 06-17-2017 12:18 PM
Airlift Airride digital complete kit Lethaldosage423 Parts For Sale 1 10-19-2015 12:12 AM
Hot Lap: 2015 Roush RS3 Test + Build a Supercharger! - AmericanMuscle.com AMAlexLazarus AmericanMuscle.com 0 10-01-2015 09:21 AM


Tags
10mm, 140, 150, 1500, 2000, belt, discharge, diy, drain, head, hex, k061080, mustang, novi, oil, size, supercharger, vortech, votech

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 06:01 AM.