anyone here with a watts linkage/ considering upgrading to one? The plan right now is to get the suspension setup for a bigger motor (i might follow in flapjack's footsteps someday), and from what I've read, the watts linkage (torque arm) is the way to go.

I was wondering if anyone had seen a model for sale for our chassis/ if they've installed one..

 

anyone? I talked to Chris at maximum motorsports, and they said they're currently designing parts for our chassis (including control arms and a torque arm)

 

I suspect that most folks don't know what a watts linkage is or what it does. Here's a good refresher:

http://en.wikipedia.org/wiki/Watts_linkage

 

Griggs Racing Products

all the info you need. Local to me yet never taken the chance to check them out. Solid performing products though.

 

ive seen the watts systems for 8.8 rear ends but not for the 7.5 when i do a rear end swap im putting it on, ive wanted it ever since i drove the saleen parelli jones edition thats the smoothest driving mustang ive ever been in.

 

cool. the griggs 40 system is close to 8k though[:@]

 

the fays 2 kit is about 600 http://www.fays2.net/

 

nice link. I'm thinking about following in Flapjack's footsteps in a couple years, so I figured a watts would be a good idea. I found the pics on the page a bit confusing though. What exactly does that system eliminate from the rear suspension, because it looked like a panhard bar was still intact