Can someone please tell me the length of the 05-11 'stang panhard bar center of bushing- to - center of bushing?
I am hoping someone has a stock unit laying around after lowering that they can put a tape measure to, or maybe an adjustable unit they haven't installed yet.
I have searched the forum ,but couldn't find any exact measurement.


-Brad

 

Anyone?

 

My guess is that there is no exact measurement; that each car depending on tolerances and equipment will vary, thus the need for aftermarket adjustable ones.

 

LOLWUT? What you are saying is that every car out there has a different length panhard bar from the factory. Sense. This makes none.

OP, I'll measure mine for you later this evening to get you a rough idea. However, I did cut my stock panhard bar in half out of boredom one evening, so it wont be an exact measurement, be off by a few MM to account for the thickness of the saw blade.

 

Good point. I guess that most "standard" Mustangs will have a common length.

However, I recently put Vogtland springs in mine and the body moved to the left (drivers side) at least 1/2", and I'm not as low as the Shelbys or Bullitts. Gotta be more than one length from the factory.

 

OEM off an "06 GT 41 3/4" center to center.

 

Perfect!
Thank you so much J2L06GT!!

Narrows my search for a panhard bar to fit my application!