Shelby Super Snake 427...using stock injectors???
#1
Shelby Super Snake 427...using stock injectors???
Hey, one of my friends made his gt500 into a super snake 427 package. Here's a couple of pics of it...
so i was at his home scrapping for parts that were taken out of his car, and since I'm going turbo I asked him if he had the injectors lying around. To my surprise, he told me he had not seen any around.
So...my question is, is he pushing the 725hp with the stock injectors??? anybody have any pictures of the stock 52# so that i can see if they are the same? anyone here with the same package that can confirm this?
so i was at his home scrapping for parts that were taken out of his car, and since I'm going turbo I asked him if he had the injectors lying around. To my surprise, he told me he had not seen any around.
So...my question is, is he pushing the 725hp with the stock injectors??? anybody have any pictures of the stock 52# so that i can see if they are the same? anyone here with the same package that can confirm this?
#2
I see he's got the Kenne Bell in there, their kits come with a boost-a-pump for the GT500's twin pumps. raising the fuel pressure is all that's needed in that car to deliver up to a little over 800whp. 800whp on race gas is the most they recommend on their kits for that car with everything stock. doubling the fuel pressure can add over 50% more flow to the injector's rating. you get diminishing results after a certain point but it's a good way to add more fuel.
Thread
Thread Starter
Forum
Replies
Last Post
M3hunter
S197 Handling Section
0
09-05-2015 03:42 PM