Add1cti0n

I have a 01 GT with a blown motor. I found this 01 Cobra engine on ebay..

http://cgi.ebay.com/ebaymotors/99-01...Q5fAccessories

My mechanical knowledge is very limited and I need to figure out what im going to need along with this engine to make the swap. Do I need a new wiring harness and computer? What problems may I run into?

pcs

you can use your stock harness, just needs to be modified for the coil packs and youll have to get your car re-tuned

Add1cti0n

If thats all I need then I better just go ahead and get the SVT

POISND U

Find out if that's a 99 or an 01. If it's a 99, get the VIN and call Ford to find out if it had "The Fix".

bhhacker

could you bolt that right up using the 3650?

bhhacker

sorry, it was late last night when i posted this. So in theory, I could take the cobra engines from these years and just drop it in on top of my tremec 3650?

I work in alaska 6 months out of the year and when I get back I have a sizeable chunk-o-change. The swap to the cobra seems to be the biggest bang fo your buck mod you are going to get if you find a good deal on a motor.

BraMas

Yes a cobra will bolt up to your 3650

Add1cti0n

luckily not 99, both this engine and my gt are 01

"This was removed from a 2001 Ford Mustang SVT Cobra. This engine had 58k miles on it. This was a clean and well maintained car and engine. It tested good, ran great and will make a killer replacement for your blown up or tired 99 - 01 Cobra. This engine is stock. There were no modifications on this vehicle."

Add1cti0n

When I do buy a new engine, weather it be 2v or 4v, is their anything I should mod on it while I have the engine out?

Mustang3GT07

Yea, Longtube headers & Cams