Is it possible....?
Guest
Posts: n/a
RE: Is it possible....?
Depends on the build and what hatch it's in.
a 93-94 EG hatch with the VX description weighed just over 2000 lbs stock, strip it and you got yourself a 1700 lb hatch easy, depending on the level of reduction. Then you can bore and stroke a B16 (out to roughly 1.8ish (after resleeving it) with 12.5:1 compression pistons, skunk2 stage 2 (or stage 3) cams, gears, hondata ecu, jdm itr tranny with an LSD and a final drive of 4.875, upgrade the fuel/spark, jdm ITR header, straight through cat, full catback exhaust, short ram intake, and a short shifter amongst other things like a flywheel/clutch it can be making about 250-275+ hp and 200ish ft lbs torque and it can run 11s with proper suspension and sticky rubber. I'm not too sure just how streetable this setup would be, but I do know of a gutted EK hatch running 10s that is completely street legal.
a 93-94 EG hatch with the VX description weighed just over 2000 lbs stock, strip it and you got yourself a 1700 lb hatch easy, depending on the level of reduction. Then you can bore and stroke a B16 (out to roughly 1.8ish (after resleeving it) with 12.5:1 compression pistons, skunk2 stage 2 (or stage 3) cams, gears, hondata ecu, jdm itr tranny with an LSD and a final drive of 4.875, upgrade the fuel/spark, jdm ITR header, straight through cat, full catback exhaust, short ram intake, and a short shifter amongst other things like a flywheel/clutch it can be making about 250-275+ hp and 200ish ft lbs torque and it can run 11s with proper suspension and sticky rubber. I'm not too sure just how streetable this setup would be, but I do know of a gutted EK hatch running 10s that is completely street legal.
5th Gear Member
Joined: Jul 2004
Posts: 3,062
From: Pittsburgh/Dayton
RE: Is it possible....?
2000si, whats the deal with you lol... have you abandoned the import people becuase most of them are ridiculous? Your one of the very few people the run imports that seem logical and know there ****. I'm just wondering why you post so much on a mustang forum. 
6th Gear Member
Joined: Jan 2004
Posts: 10,639
From: IL
RE: Is it possible....?
ORIGINAL: 90Mustangfan
Is it possible For a 98' honda civic to run low 11's N/A. no NoS, no turbo,no gutted. nothing. completely stock except for a built v-tech motor and radials? He said he could smoke my mustang with my mods.He said i could get 5 car lengths on my car.I pesronally have never seen a N/A honda civic go past 16's so I think he full of it, and I said lets race, and he'll never commit to race me.
Is it possible For a 98' honda civic to run low 11's N/A. no NoS, no turbo,no gutted. nothing. completely stock except for a built v-tech motor and radials? He said he could smoke my mustang with my mods.He said i could get 5 car lengths on my car.I pesronally have never seen a N/A honda civic go past 16's so I think he full of it, and I said lets race, and he'll never commit to race me.
It's got all kinds of electrical problems that has everybody stumped. So I think he gave up. He hasn't driven it for about a year now. He had a kid...Lost interest...Doesn't care anymore...
My point???? No on the N/A 11's. 1/8th maybe.
Thread
Thread Starter
Forum
Replies
Last Post