Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

kill list

Thread Tools
 
Search this Thread
 
Old Nov 23, 2006 | 04:55 PM
  #1  
jacklambert's Avatar
jacklambert
Thread Starter
 
Joined: Nov 2006
Posts: 40
From:
Default kill list

just thought id list a few of my kills in the past couple weeks. one was a brand new v-6 mustang, i didnt even get out of first gear. next was a gen-iii v-6 camaro, i shifted below 4000 each gear(i normally go to 7000) and blew his doors off. next was an acura integra, i actually had to hit second with this one. of course i was a car length behind him when we started and then i had to get in his lane so i could go strait through the light. well happy thanksgivin!
Old Nov 23, 2006 | 05:10 PM
  #2  
Quick Shot xMLx's Avatar
Quick Shot xMLx
5th Gear Member
 
Joined: Jul 2006
Posts: 3,151
From: Charlotte, NC
Default RE: kill list

You shift at 7000 on an old small block?
Old Nov 23, 2006 | 06:13 PM
  #3  
jacklambert's Avatar
jacklambert
Thread Starter
 
Joined: Nov 2006
Posts: 40
From:
Default RE: kill list


ORIGINAL: Quick Shot xMLx

You shift at 7000 on an old small block?

oooooooo yyyyeeeeeaaaaa!!!!!!!! it loves to rev. i dont make power till 3000 it always amazes people when i tell em my shift light is set at 6800
Old Nov 23, 2006 | 06:20 PM
  #4  
Quick Shot xMLx's Avatar
Quick Shot xMLx
5th Gear Member
 
Joined: Jul 2006
Posts: 3,151
From: Charlotte, NC
Default RE: kill list

I don't know I just find it weird because I have a friend with a 351 Windsor and his redline is about 5200 and he makes all his power down low. I know you have a Cleveland but if your motor's stock I doubt their can be that big of a difference. Granted I don't know much about the older motors.....
Old Nov 23, 2006 | 06:31 PM
  #5  
jacklambert's Avatar
jacklambert
Thread Starter
 
Joined: Nov 2006
Posts: 40
From:
Default RE: kill list

well it aint really stock. it probaly got 400-500 hp. of course most clevelands rev higher than windsors, my grandad had a bone stock '74 4 door torino that had a factory 3000 stall. i must say hearing an old motor rev 7000-7200 rpms is just friggen awesome. what do the newer mustangs like yours rev?
Old Nov 23, 2006 | 06:34 PM
  #6  
Quick Shot xMLx's Avatar
Quick Shot xMLx
5th Gear Member
 
Joined: Jul 2006
Posts: 3,151
From: Charlotte, NC
Default RE: kill list

Mines is at about 5750-5800ish and I believe the 4 Valve heads(Cobra/Mach) go up to about 6500
Old Nov 23, 2006 | 09:02 PM
  #7  
TommyV8's Avatar
TommyV8
5th Gear Member
 
Joined: Jul 2004
Posts: 4,438
From: St. Louis
Default RE: kill list

With a 1/8 mile like you run those cars shouldn't even be on your radar, not even worth typing about.
Old Nov 23, 2006 | 09:42 PM
  #8  
OneFine89Mustang's Avatar
OneFine89Mustang
4th Gear Member
 
Joined: Aug 2005
Posts: 1,410
From:
Default RE: kill list

nice kills
Old Nov 23, 2006 | 10:19 PM
  #9  
Kadence's Avatar
Kadence
3rd Gear Member
 
Joined: Dec 2005
Posts: 529
From: Houston, TX
Default RE: kill list


ORIGINAL: TommyV8

With a 1/8 mile like you run those cars shouldn't even be on your radar, not even worth typing about.
+1 , i would never waste gas on those cars, and you actualy had to try with the integra??
Old Nov 24, 2006 | 04:06 AM
  #10  
empatho's Avatar
empatho
2nd Gear Member
 
Joined: Feb 2006
Posts: 335
From:
Default RE: kill list

+2 you need a better kill list



All times are GMT -5. The time now is 04:43 PM.