Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

I stand corrected

Thread Tools
 
Search this Thread
 
Old Dec 6, 2004 | 11:49 AM
  #1  
mdvaldosta's Avatar
mdvaldosta
Thread Starter
I ♥ Acer
 
Joined: Sep 2003
Posts: 8,826
From: United States
Default I stand corrected

about the '05 GT's


While IMO they barely had the hp/weight ratio stock to hit 13's (low trap speeds), and seeing probably a dozen '05 trap between 14.0 - 14.2, I knew they had 13 second potential but not by much. My reasoning being that to get into the 13's stock they would need to get their 60's to at least high 1.9's - which is certainly possible in the right conditions and a good launch, but not really to be expected by most drivers.

At any rate - their was a new GT at the track yesterday. Im not sure what mods, if any, the guy had because he claimed it was stock - and it appeared stock to me. Didn't notice the tire brand although they were stock size (tall sidewall and not very wide). Well the guy is icing his intake for and I see him run a 14.0 flat with a bog off the line - I was like damn he bogged and still ran a 14.0. The guy was talkin some smack to a few folks crowding around his car (them '05's are attention getters lol)... anyways he says he's ran a best of 13.5 STOCK - I just shake my head thinkin the guy is full of ****. Well... the guy lets his car sit for an hour with a 20lb bag of ice on the engine. Gets up and next thing I know dude runs a 13.3 @ 101... b!tch cut a 1.6 60'

WTF - a 1.6 60'!!!!!!! I've got no ****in clue as to how because the track wasn't stickin that good later in the day and I was cuttin 1.8's on Nitto's... and the Camaro running slicks and skinnies and goin mid 11's was cuttin 1.6 60's too... lol wtf a stock suspension and tires '05 GT cut the same 60' as a mid 11 second Camero with a modded suspension and BIG slicks!

So, there you have it - I stand corrected but I somehow feel yesterday was in the Twilight Zone or something [&:]
Old Dec 6, 2004 | 11:55 AM
  #2  
98LS1's Avatar
98LS1
6th Gear Member
 
Joined: Oct 2003
Posts: 8,635
From: North Cackilacky
Default RE: I stand corrected

ORIGINAL: mdvaldosta

mid 11 second Camero with a modded suspension and BIG slicks!
CamEro....that still gets me. Haha.

[8D]

Holy hell....I thought my 1.9 bone stock was impressive....

EDIT: I think he had Nawwwwzz y0!
Old Dec 6, 2004 | 12:25 PM
  #3  
OneGearhead's Avatar
OneGearhead
6th Gear Member
 
Joined: Mar 2004
Posts: 5,867
From: VA
Default RE: I stand corrected

he had something goin on.....but, DAMN thats still impressive if it WAS stock.....
Old Dec 6, 2004 | 01:22 PM
  #4  
RollinThunder's Avatar
RollinThunder
3rd Gear Member
 
Joined: Mar 2004
Posts: 709
From:
Default RE: I stand corrected

how the hell do u get that 60' time?!?...on stock tires!...something deff. up
Old Dec 6, 2004 | 01:36 PM
  #5  
2001_SaleenS281_08's Avatar
2001_SaleenS281_08
5th Gear Member
 
Joined: Apr 2004
Posts: 2,063
From: Madison, WI
Default RE: I stand corrected

dang!! thatz quick!
Old Dec 6, 2004 | 01:39 PM
  #6  
StangMang's Avatar
StangMang
5th Gear Member
 
Joined: Mar 2004
Posts: 2,898
From: Assachusetts
Default RE: I stand corrected

Wowza...thats pretty damn decent[&:]
Old Dec 6, 2004 | 01:44 PM
  #7  
98LS1's Avatar
98LS1
6th Gear Member
 
Joined: Oct 2003
Posts: 8,635
From: North Cackilacky
Default RE: I stand corrected

Yes...but Vipers, Vettes, Ferrari's, etc....don't pull 1.6 60's bone stock. Are you sure you seen things correctly?
Old Dec 6, 2004 | 01:48 PM
  #8  
mdvaldosta's Avatar
mdvaldosta
Thread Starter
I ♥ Acer
 
Joined: Sep 2003
Posts: 8,826
From: United States
Default RE: I stand corrected

Yes I was standing right there when the dude ran the 13.3 @ 101 and was like... wtf how did that happen? a few minutes later I heard he cut a 1.6 60'

The #'s add up, he woulda had to have a 60' like that to run a low 13
Old Dec 6, 2004 | 02:21 PM
  #9  
iwrxit's Avatar
iwrxit
4th Gear Member
 
Joined: Dec 2003
Posts: 1,369
From: United States
Default RE: I stand corrected

wow...i never even cut better than a 1.744. thats ridiculous.
Old Dec 6, 2004 | 03:16 PM
  #10  
jdaniel's Avatar
jdaniel
I ♥ Acer
 
Joined: Apr 2004
Posts: 9,172
From:
Default RE: I stand corrected

There is NOOOO way dude. LOL There was a '05 at my track last Friday and he was running mid to low 14's. He said he was driving the hell out of it and could only pull a 14.14 out of it. That guy HAD to have some mods.



All times are GMT -5. The time now is 06:23 PM.