I went to the track this past weekend end and my 60 foot was ****. 2.491 if i can remember correctly, what should i beable to achieve with my mods and a set of MT DR's or 555R's? Mods in my sig " for those who believe my mod list is fictional do not REPLY"

Thanks Guys

 

at least a 2.0, i'm no expert on Mustangs, but i'd think with MT DR's, that you should be able to get down past a 1.8

 

I think 1.8 is more realistic.

 

well i'm doing 1.8s on street tires, i think you can do 1.6s with the right set of DRs or slicks and good driving...

 

1.6s with stock suspension is wishful thinking. I'd say to shoot for a 1.9 with a drag radial, considering how stock the suspension is.

 

When my suspension was stock with the procharger at 8 psi I could run 1.7x 60s with a set of MT drag radials.

 

1.6-1.8 should be attainable, depending on your suspension set up

Dont get the nittos for track only they are the least grippy. MTs or BFGs much better IMO

 

Your a regular fu*kin speed racer. Your raping SRT8s in the other thread. Your cutting sixty times on street tires that most of your fellow mustang drivershave to use drag radials to get. I bow to your greatness.[&:]

 

I believe you could cut 1.7s because of the abundance of power compared to a stock or lightly modded stang. A near stocker will probably get high 1.8s or 1.9s with the average driver whos afraid to leave hard because they might break something.

 

Do yourself a favor and don't even consider the Nitto's for the track. I think with a set of MT's most of the folks here are correct in the 1.7x range with your mods.