Raced two beamers...
08-04-2008, 10:58 AM
#11
3rd Gear Member
Join Date: Jul 2006
Location: Tucson Arizona
Posts: 732
RE: Raced two beamers...
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is.
ORIGINAL: nyc06gt
an E92 wouldve destroyed you, they make around 415HP and run mid 12s.the E36 a stock GT would beat. the E46, well a stock GT should beat a vert, not a coupe. the E46 make 330 HP and the coupesrun low 13s. but with your mods you should take verts easily and a drivers race for a coupe. damn auto M3s and their paddleshifting doing 0-60 in .3 better than the manuals... crazy! the verts are WAY slower , not sure what you ran against. but im stock and beat a E46 vert, was very surprised and did smoe researxch when i got home and found out they are quite a bit slower than the coupe M3.
and no matter what M3 you run they will kill us up over 130, the E46s can get up to 175+ and the E92s over 200
(delimited of course)
and FYI i dunno what the E36/46 difference is between coupes and verts are, too drunk to look it up. but E92 - up to a .7 difference in 0-60. im sure its similar with the older cars as well
an E92 wouldve destroyed you, they make around 415HP and run mid 12s.the E36 a stock GT would beat. the E46, well a stock GT should beat a vert, not a coupe. the E46 make 330 HP and the coupesrun low 13s. but with your mods you should take verts easily and a drivers race for a coupe. damn auto M3s and their paddleshifting doing 0-60 in .3 better than the manuals... crazy! the verts are WAY slower , not sure what you ran against. but im stock and beat a E46 vert, was very surprised and did smoe researxch when i got home and found out they are quite a bit slower than the coupe M3.
and no matter what M3 you run they will kill us up over 130, the E46s can get up to 175+ and the E92s over 200
(delimited of course)and FYI i dunno what the E36/46 difference is between coupes and verts are, too drunk to look it up. but E92 - up to a .7 difference in 0-60. im sure its similar with the older cars as well
08-04-2008, 11:27 AM
#12
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Dfw/Austin, TX
Posts: 3,465
RE: Raced two beamers...
ORIGINAL: Morbid Intentions
good kill man!
do you still have the lightweights on or did you swap back to the gigantic industrial baby killers? [8D]
don't let the BMW guys hear you call them "beamers" though... they will argue that fact like you shot their mother
"BEAMERS ARE MOTORCYCLES!!! NYAAHHH!!! THE CORRECT TERM IS BIMMER!"
either way 75% of them touch little kids so whatever
[8D]
good kill man!
do you still have the lightweights on or did you swap back to the gigantic industrial baby killers? [8D]
don't let the BMW guys hear you call them "beamers" though... they will argue that fact like you shot their mother
"BEAMERS ARE MOTORCYCLES!!! NYAAHHH!!! THE CORRECT TERM IS BIMMER!"
either way 75% of them touch little kids so whatever
[8D]
ORIGINAL: 05_SRT4_Tony
OP: Love your F'in wheels....................that is all
OP: Love your F'in wheels....................that is all
ORIGINAL: 05slpGT
Ok that post about how the verts are slower must be true, i had header back exhuast, cai/tune and 4.10s when i raced the m3 coupe, and i ran about 1/2 to a car ahead of him, so yeah this makes more sense to me now!
ORIGINAL: whtcanbrwnd04u
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
ORIGINAL: danGT06
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is.
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is.
ORIGINAL: nyc06gt
an E92 wouldve destroyed you, they make around 415HP and run mid 12s.the E36 a stock GT would beat. the E46, well a stock GT should beat a vert, not a coupe. the E46 make 330 HP and the coupesrun low 13s. but with your mods you should take verts easily and a drivers race for a coupe. damn auto M3s and their paddleshifting doing 0-60 in .3 better than the manuals... crazy! the verts are WAY slower , not sure what you ran against. but im stock and beat a E46 vert, was very surprised and did smoe researxch when i got home and found out they are quite a bit slower than the coupe M3.
and no matter what M3 you run they will kill us up over 130, the E46s can get up to 175+ and the E92s over 200 (delimited of course)
and FYI i dunno what the E36/46 difference is between coupes and verts are, too drunk to look it up. but E92 - up to a .7 difference in 0-60. im sure its similar with the older cars as well
an E92 wouldve destroyed you, they make around 415HP and run mid 12s.the E36 a stock GT would beat. the E46, well a stock GT should beat a vert, not a coupe. the E46 make 330 HP and the coupesrun low 13s. but with your mods you should take verts easily and a drivers race for a coupe. damn auto M3s and their paddleshifting doing 0-60 in .3 better than the manuals... crazy! the verts are WAY slower , not sure what you ran against. but im stock and beat a E46 vert, was very surprised and did smoe researxch when i got home and found out they are quite a bit slower than the coupe M3.
and no matter what M3 you run they will kill us up over 130, the E46s can get up to 175+ and the E92s over 200 (delimited of course)
and FYI i dunno what the E36/46 difference is between coupes and verts are, too drunk to look it up. but E92 - up to a .7 difference in 0-60. im sure its similar with the older cars as well
08-04-2008, 11:43 AM
#13
1st Gear Member
Join Date: Jun 2008
Location: Queens, New York
Posts: 127
RE: Raced two beamers...
ORIGINAL: danGT06
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
08-04-2008, 01:08 PM
#14
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Dfw/Austin, TX
Posts: 3,465
RE: Raced two beamers...
ORIGINAL: nyc06gt
was just going off the 13.2 OP has in his sig. but yeah youre right with the gears and new pipe itd be a drivers raceand the E92 M3s to lose. if its an auto youre toast
ORIGINAL: danGT06
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Full exhaust is on its way. Should be ready and installed in one week, along with a short shifter. I'm hoping for constant 12.7s.
Intake + Tune + 17" Wheels + 275/40 MT ET Streets + 4.10s + Full Exhaust + FRPP Handling Pack = Constant 12.7s, yes/no/maybe?
08-04-2008, 01:14 PM
#15
RE: Raced two beamers...
Nice kill. It's always fun to beat the Beamer guys. They seam so cocky.I have a buddy whos a good driverwith a lightly modded 03 M3 and he managed a 13.6 at cecil last year with a 2.0 sixty so a Modded Mustang should handle an M3.
I have a buddy whos a good driverwith a lightly modded 03 M3 and he managed a 13.6 at cecil last year with a 2.0 sixty so a Modded Mustang should handle an M3.
08-04-2008, 01:17 PM
#16
Gentleman's Relish
Join Date: Feb 2005
Location: AZ
Posts: 13,111
RE: Raced two beamers...
ORIGINAL: whtcanbrwnd04u
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
As for the 3 series Beemer 90's style...easy kill for S197. M series, depends on the year. Pre 2004 I belive should be a good run 2007+ mmm.better have some mods. They run really well at highway speeds.
08-04-2008, 01:38 PM
#17
3rd Gear Member
Join Date: Jul 2006
Location: Tucson Arizona
Posts: 732
RE: Raced two beamers...
Yes with ease. With good air and track prep I wouldn't be surprised if you hit 12.4-12.5.
ORIGINAL: whtcanbrwnd04u
Full exhaust is on its way. Should be ready and installed in one week, along with a short shifter. I'm hoping for constant 12.7s.
Intake + Tune + 17" Wheels + 275/40 MT ET Streets + 4.10s + Full Exhaust + FRPP Handling Pack = Constant 12.7s, yes/no/maybe?
ORIGINAL: nyc06gt
was just going off the 13.2 OP has in his sig. but yeah youre right with the gears and new pipe itd be a drivers raceand the E92 M3s to lose. if its an auto youre toast
ORIGINAL: danGT06
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Full exhaust is on its way. Should be ready and installed in one week, along with a short shifter. I'm hoping for constant 12.7s.
Intake + Tune + 17" Wheels + 275/40 MT ET Streets + 4.10s + Full Exhaust + FRPP Handling Pack = Constant 12.7s, yes/no/maybe?
08-04-2008, 01:38 PM
#18
4th Gear Member
Join Date: Jun 2007
Location: San Antonio, Texas
Posts: 1,355
RE: Raced two beamers...
ORIGINAL: whtcanbrwnd04u
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
Yeah i was actually really surprised. It was a vert, so maybe that was it. I pulled on his EASY.
08-04-2008, 02:09 PM
#19
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Dfw/Austin, TX
Posts: 3,465
RE: Raced two beamers...
ORIGINAL: danGT06
Yes with ease. With good air and track prep I wouldn't be surprised if you hit 12.4-12.5.
Yes with ease. With good air and track prep I wouldn't be surprised if you hit 12.4-12.5.
ORIGINAL: whtcanbrwnd04u
Full exhaust is on its way. Should be ready and installed in one week, along with a short shifter. I'm hoping for constant 12.7s.
Intake + Tune + 17" Wheels + 275/40 MT ET Streets + 4.10s + Full Exhaust + FRPP Handling Pack = Constant 12.7s, yes/no/maybe?
ORIGINAL: nyc06gt
was just going off the 13.2 OP has in his sig. but yeah youre right with the gears and new pipe itd be a drivers raceand the E92 M3s to lose. if its an auto youre toast
ORIGINAL: danGT06
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Nice kill OP. I've also pulled easilyon every E46 M3 I've raced.
An E92 wouldn't "destroy" the OP. With the OP's mods hes also good for mid-12's. There is no doubt the E92 M3 would start to pull at higher speeds but from 0-100 I think it would be pretty even. 415hp is no joke but 295 ft/lbs torque is
Full exhaust is on its way. Should be ready and installed in one week, along with a short shifter. I'm hoping for constant 12.7s.
Intake + Tune + 17" Wheels + 275/40 MT ET Streets + 4.10s + Full Exhaust + FRPP Handling Pack = Constant 12.7s, yes/no/maybe?
A 12.4 would be fking sweeeeet. I can't wait to hit the track as soon as this texas heat GetsTFO.