Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

Got rocked 😔

Thread Tools
 
Search this Thread
 
Old Jul 24, 2013 | 10:56 PM
  #1  
crash's Avatar
crash
Thread Starter
BrandofPoop
 
Joined: Jan 2007
Posts: 3,835
From: Bay Area
Default Got rocked 😔

I play basketball with a group of guys and one of them has an E46 M3 SMG coupe. Years ago I raced one that was SMG and a vert. Those rolls were very close with each of us winning one each. I figured it would be somewhat close. Nope, he approached me at a bend and was just stabbing his throttle. Just getting 4.10's I am kinda relearning how to drive my car again. I was in 1st doing 30 and let him take the hit. Mistake number one. I pursued and over revved 1st...badly, mistake number two. Redline is 5750 and I didn't notice where I was at. I shifted at 6500 Fawk!!! I shut I down and the punk just waved his hand signaling good bye. I knew I'd lose but damn. I'll see him tomorrow and I'll just say, we'll what do you expect. Next time ill kick my friend out, bring a camera and ask for a dig. I feel that I can out launch him an hold him off for a while. From a dig vs a intake cat back M3 how long can I hold him off from a dig?
Old Jul 25, 2013 | 07:33 AM
  #2  
PurpleIcedGT's Avatar
PurpleIcedGT
6th Gear Member
 
Joined: Aug 2009
Posts: 6,028
From: New Jersey
Default

You can prob hold him off realistically til about 35mph from a dig. Those are quick cars.
Old Jul 25, 2013 | 07:46 AM
  #3  
3vStang's Avatar
3vStang
2nd Gear Member
 
Joined: Aug 2011
Posts: 396
From: PA
Default

What are your mods? Just bolt ons? I've seen a stock e46 beat a bolt on 3v by about a length.
Old Jul 25, 2013 | 11:34 AM
  #4  
S8ER01Z's Avatar
S8ER01Z
6th Gear Member
 
Joined: Sep 2006
Posts: 5,565
From: NC
Default

Is it a stock M3? I would guess you could hold him to almost the 1/8th... IIRC they are a good race for a stock Mach 1.
Old Jul 25, 2013 | 05:18 PM
  #5  
Stone629's Avatar
Stone629
6th Gear Member
 
Joined: Feb 2007
Posts: 11,302
From: North Carolina
Default

Originally Posted by S8ER01Z
Is it a stock M3? I would guess you could hold him to almost the 1/8th... IIRC they are a good race for a stock Mach 1.
This^^

IMO, you are a drivers race, if not a tad quicker, from a dig thru the 1/8th. I personally don't see him really coming around you thru the 1/4 if you are already ahead, not on a track anyway. From a roll like that, he was prob sitting at a high RPM, right in the middle of his power, so giving him the hit was a mistake.
Old Jul 25, 2013 | 06:26 PM
  #6  
bluebeastsrt's Avatar
bluebeastsrt
6th Gear Member
 
Joined: Jun 2006
Posts: 11,565
From: Jersey
Default

I have a different take on things. I have a close friend thats real into BMWs. (I dont hold that against him). He had a stock E46 that ran 13.2 and cut a 2.o sixty three times in a row. So he was very consistant.He now owns an E93 V8 car. I'm going to guess you won't hold off the bimmer at all from a dig. But I'm always rooting for the American muscle. My buddy knows he has nothing for my stang! Or the old skittle for that matter unless he throws some turns into the mix.
Old Jul 25, 2013 | 09:22 PM
  #7  
crash's Avatar
crash
Thread Starter
BrandofPoop
 
Joined: Jan 2007
Posts: 3,835
From: Bay Area
Default

He basically is stock. Apparently those motors are pretty much tapped out from the factory. I think he was in his best spot and me in my worst. When I saw him today I told him that I hit the limiter and that I wanted to run again later. I'll try n get go pro for it. He doesn't strike me as one who goes to the track or go from digs. Not that I do all the time lol. Hopefully I can prove you wrong blue
Old Jul 26, 2013 | 01:03 AM
  #8  
bluebeastsrt's Avatar
bluebeastsrt
6th Gear Member
 
Joined: Jun 2006
Posts: 11,565
From: Jersey
Default

Like I said bro. I'm rooting for ya.
Old Jul 26, 2013 | 07:49 AM
  #9  
S8ER01Z's Avatar
S8ER01Z
6th Gear Member
 
Joined: Sep 2006
Posts: 5,565
From: NC
Default

Originally Posted by bluebeastsrt
I have a different take on things. I have a close friend thats real into BMWs. (I dont hold that against him). He had a stock E46 that ran 13.2 and cut a 2.o sixty three times in a row. So he was very consistant.He now owns an E93 V8 car. I'm going to guess you won't hold off the bimmer at all from a dig. But I'm always rooting for the American muscle. My buddy knows he has nothing for my stang! Or the old skittle for that matter unless he throws some turns into the mix.
Blue this is why I believe he will hold up pretty well... even the low 13 second passes for e46 M3s (which are not the norm) have mid 8s and low 80 traps in the 1/8th. They do well on the top end but I don't see any of the 1/8th times being out of the OPs range. We will just have to wait and see what happens.
Old Jul 26, 2013 | 10:23 PM
  #10  
UPRSharad's Avatar
UPRSharad
Former Sponsor
 
Joined: Jul 2011
Posts: 2,570
From: FL
Default

I think you could take him if you get out on him hard from a dig. You might need stickier tires though. (and I don't know your suspension mods)

Oh, and I'll just leave this right here...

Name:  DigRacing_zpsc708e8a7.jpg
Views: 22
Size:  116.9 KB



All times are GMT -5. The time now is 08:09 PM.