hey guys i just got a set of upr double adjustable upper control arms and a set of lowers both with spherical bushings how do i set my pinion angle do i just set them to the same length as the stockers? also do i need to put in a new pinion snubber? i didnt get one with this kit from upr

 

Do you have a link to the uppers? I am hoping that one end is spherical or would ask that you replace the axle bushings with a spherical one.

Jazzer

 

http://www.uprproducts.com/mustang-c...ackage-79.html

 

OK... great

Seems to me, the pinion angle is 1.5~2 degrees, but don't quote me, as I am not a 1/4 mile dood. Is your car lowered or OEM ride height? Hopefully, somebody will chime in here that can give you some specifics on the questions I cannot answer... pretty much all of them

Jazzer

 

i was going to lower it when i do the control arms with a set of h&r race springs 1.25 in the front and 1.00 in the back i have the caster camber kit and new isolator bushings i dont have a clue as to set the pinion angle

 

Are their heim joins on all 4 ends of your control arms? If so set the pinion angle for -2.