Hello,

I recently lowered my car BC Racing coilovers and installed a BMR on-car adjustable panhard bar. I have noticed a creaking noise when i angle into driveways or any slow maneuvers which flex the rear of the car. I have heard it squeak while up to speed occasionally, but it apparent when making low speed maneuvers. The bar was greased as specified and torqued with weight on the axle. I also loctited both of the bolts. I have no idea how to get rid of this noise. Thanks in advance for any insight.

 

Welcome to the world of aftermarket bolt on parts. Polyurethane bushings I presume. If they are not binding as in torqued without weight on the car, then try coating all the surfaces with grease.