Need info on Gears
#11
RE: Need info on Gears
Ok I jacked up the car this weekend, and did the tape thing. The Drive shaft turned about 3 and just under a 1/4 turns so I am thinking stock gears. So I went back out on the hwy cruised at 80 sure enough about 2300 RPM, then I drop into 4th 2700 give or take. So maybe I was in 4th that time. Go figuer. The car is still pretty quick of the line. Not sure if I should even change the gears out. Thanks for all the help and Info. ACR the car looks good.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM