make sticky? 03/04 cobra mods and dyno #s
#11
RE: make sticky? 03/04 cobra mods and dyno #s
2003 Sonic Blue Cobra- 8,200 Miles
2.76 Billetflow Pulley w/ Idlers
Accufab Throttle Body/Plenum
JLT Cold Air Intake
SLP Exhaust
LFP Heat Exchanger
LFP Intercooler Tank
NGK TR6's
Ford Racing FR500's w/ BFG's
Autometer Boost/Vac Gauge
Billetflow IRS Brace
Never had it dynoed and never ran it at the track yet.
[IMG]local://upfiles/24331/541916DA4D344E0284EFC95FD530C51F.jpg[/IMG]
2.76 Billetflow Pulley w/ Idlers
Accufab Throttle Body/Plenum
JLT Cold Air Intake
SLP Exhaust
LFP Heat Exchanger
LFP Intercooler Tank
NGK TR6's
Ford Racing FR500's w/ BFG's
Autometer Boost/Vac Gauge
Billetflow IRS Brace
Never had it dynoed and never ran it at the track yet.
[IMG]local://upfiles/24331/541916DA4D344E0284EFC95FD530C51F.jpg[/IMG]
#13
RE: make sticky? 03/04 cobra mods and dyno #s
2003 10th anniversay cobra, 2.76 billet flow blower pulley, 3 100mm idlers 1 92 mm idler, jlt cold air intake, magnaflow catback exhaust, tune. I ahve a prochamber and a fluidyne heat exchanger waiting to go on yet too. but with the other mods i dynoed at 443.4 rwhp and 460rwtq. should be at the trakc this weekend for the first time so i'll let you know but i am still running my street tires so traction will be an issue lol.
#14
RE: make sticky? 03/04 cobra mods and dyno #s
Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi.
http://s84.photobucket.com/albums/k4/jamie660/
http://s84.photobucket.com/albums/k4/jamie660/
#16
RE: make sticky? 03/04 cobra mods and dyno #s
ORIGINAL: JamesTronix
Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi.
http://s84.photobucket.com/albums/k4/jamie660/
Mods in my sig. Going to the track tomorrow night! Car is about 14-15 psi.
http://s84.photobucket.com/albums/k4/jamie660/
#17
RE: make sticky? 03/04 cobra mods and dyno #s
03 Cobra, Mineral Grey besides the mods listed in my sig I also have a Billet Flow 2.76" pulley w/ 4 idlers, but I have to leave the stock pulley on and put the stock H pipe back on so the dealership can fix my clutch TB (just started squelling like a rat in a blender[:@]) no dyno numbers yet
#18
RE: make sticky? 03/04 cobra mods and dyno #s
Just got back from the track! Best run was 8.18. I cut a .552 light on it! It is a 8th mile track. No wheel hop issues at all. No spinning, just a little barking the tires. I launched at 2500rpms.