SVT Forums

PULLY SIZE

Thread Tools
 
Search this Thread
 
Old Apr 11, 2007 | 03:58 AM
  #1  
Speeder_069's Avatar
Speeder_069
Thread Starter
1st Gear Member
 
Joined: Feb 2007
Posts: 148
From:
Default PULLY SIZE

i was woundering how pullys make u have more power i just got my cobra about 6 hours ago and i was going to order parts tomarrow and what are some chaep bolt on that will give alot of power?*
Old Apr 11, 2007 | 02:39 PM
  #2  
apexslider's Avatar
apexslider
1st Gear Member
 
Joined: Mar 2007
Posts: 75
From:
Default RE: PULLY SIZE

underdrive pullies or blower pullies? Blower pullies give you more power (smaller upper) because the belt can turna smaller diameter pullyfaster, increasing the amount of positive pressure forced into your motor. I'm not to sure on the lower blower pully, I think they even may go larger on that on, but think of it like gears on you old 10 speed bike, the faster you can pedal the more air you can move. Bad analaogy, but you get the point

oh, and congrats on the new ride!!!!
Old Apr 11, 2007 | 02:53 PM
  #3  
03supercobra's Avatar
03supercobra
1st Gear Member
 
Joined: Nov 2006
Posts: 140
From:
Default RE: PULLY SIZE

good pully combos are 2.7 with 2# lower, 2.8 wit 4#, 2.9 wit 6#, and so on.
Old Apr 11, 2007 | 04:14 PM
  #4  
italia18's Avatar
italia18
3rd Gear Member
 
Joined: Sep 2006
Posts: 560
From:
Default RE: PULLY SIZE

www.howstuffworks.com
Old Apr 11, 2007 | 05:24 PM
  #5  
Cobra_Commander's Avatar
Cobra_Commander
1st Gear Member
 
Joined: Aug 2006
Posts: 136
From: DeLand, FL
Default RE: PULLY SIZE

Wow, got it six hours ago and already looking to addmajor hp? I've been driving mine daily for almost a year now and the power level is JUST starting to feel like not enough! I would suggest beefing up that rear end you were mentioning in the other thread. I had bad wheel hop in mine also and figured why add more HP when I couldn't put what I already had to the ground...just my .02

But if you do decide to go the other route thenmore power to you

Pun intended.
Old Apr 11, 2007 | 05:25 PM
  #6  
Cobra_Commander's Avatar
Cobra_Commander
1st Gear Member
 
Joined: Aug 2006
Posts: 136
From: DeLand, FL
Default RE: PULLY SIZE

ORIGINAL: italia10588

www.howstuffworks.com
awesome site ^
Old Apr 12, 2007 | 04:50 AM
  #7  
mattmoto441's Avatar
mattmoto441
3rd Gear Member
 
Joined: Jul 2006
Posts: 951
From:
Default RE: PULLY SIZE

well if you whant a kit with all the stuff you will need to run highter boost and a good tune you will need one of these dyno tuned power packs from RPMoutlet.com, i would get the SCT Xcal2 tuned power pack with the 2.75 pulley and NGK pluggs its the best bang for the buck out there these days, that would get you to 440hp easy


http://www.rpmoutlet.com/03cobra.htm


ohh and i port blowers also

Old Apr 12, 2007 | 07:18 AM
  #8  
italia18's Avatar
italia18
3rd Gear Member
 
Joined: Sep 2006
Posts: 560
From:
Default RE: PULLY SIZE

quote:

ORIGINAL: italia10588

www.howstuffworks.com


awesome site ^
hell yes <3

You can learn a TON about a TON there. Its where I learned alot about cars a few years back.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
3
Oct 2, 2015 08:06 AM
MustangForums Editor
S550 2015-2023 Mustang
1
Oct 1, 2015 09:29 AM
MustangForums Editor
GT350 S550 Tech
1
Sep 29, 2015 03:29 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
Sep 29, 2015 03:23 PM




All times are GMT -5. The time now is 04:51 AM.