Supercharger Pulleys
#1
Supercharger Pulleys
Hello all, I'd like to introduce myself, I'm the owner of NHERBST454 Pulleys on ebay and was wondering if many guys use, or would like to use, modular setups on your supercharged Mustangs? I've been making modular pulley systems for Grand Prix GTP's, Cobalt SS's, Regal GS's, etc (yeah, I know they're all GM) for a few years now and would be very interested in providing 8-rib systems to the supercharged Mustang crowd as well. If you're curious about my service, please feel free to check my ebay feedback... NHERBST454 Pulleys feedback
Thanks for your time and feel free to pm/email me with any questions,
Nate
NHERBST54 Pulleys
Thanks for your time and feel free to pm/email me with any questions,
Nate
NHERBST54 Pulleys
#5
RE: Supercharger Pulleys
Here are a few pictures of the 6-rib setups I've been making. Due to the fact that these are from the same company, Eaton, I believe the supercharger shaft and location of the first groove will be the same. I am also willing to send a free pulley system of whatever size someone wants as a test to make sure it fits assuming they're willing to send me the stock press-on pulley and give me the proper feedback to let me know if it works. Also, I would need them to make a post about it here. The first person willing to do so who pm's me will get a free modular system with the pulley size fo their choice.
I also make idler/tensioner pulleys, but would need to get ahold of some stockers to get the correct dimensions.
Here's a picture of the kit. This is a 6-rib setup however so your pulleys will have 8 ribs. Included is a billet aluminum pulley, stainless steel hub, 7 screws (5 required + 2 extra) and an allen wrench.
Pic of the pulley bolted to the hub
This is a pulley for the Cobalt SS stage 2 kit, another type I make, and it shows the polished finish I offer.
Thanks and feel free to email/pm me with any questions!
Nate
NHERBST454 Pulleys
I also make idler/tensioner pulleys, but would need to get ahold of some stockers to get the correct dimensions.
Here's a picture of the kit. This is a 6-rib setup however so your pulleys will have 8 ribs. Included is a billet aluminum pulley, stainless steel hub, 7 screws (5 required + 2 extra) and an allen wrench.
Pic of the pulley bolted to the hub
This is a pulley for the Cobalt SS stage 2 kit, another type I make, and it shows the polished finish I offer.
Thanks and feel free to email/pm me with any questions!
Nate
NHERBST454 Pulleys