New Dyno Numbers
08-13-2007, 09:09 PM
#1
1st Gear Member
Thread Starter
Join Date: Mar 2007
Location:
Posts: 117
New Dyno Numbers
I went to HED the other day and got my car dynoed. It made 465rwhp and 500rwtq and my mods are 2.8 upper, CAI, magnaflow catback with gutted stock h-pipe and predator tuned by RWTD and I ported my own blower and TB so what do you think is that pretty good numbers for it around 90 degrees.
08-13-2007, 10:27 PM
#2
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 398
RE: New Dyno Numbers
Those numbers aredecent. I had comparable mods on my 03 Cobra and made 500rwhp 486 torque tuned by RWTD. As far as Z06AINT**** goes, have you even raced one? With only 465rwhp and a 3800lb cobra you will get owned by a Z....
08-14-2007, 10:04 AM
#5
2nd Gear Member
Join Date: Feb 2007
Location:
Posts: 329
RE: New Dyno Numbers
Ive raced lots of Z06's. The best one was one with a g5x4 cam(look up the specs if you can find them they are nuttsss) And trick flow heads all the stuff that goes along with that setup making around 480 at the wheels and we did a freeway race all the way to 150 and i walked him slowly but i still walked him. And 480 is around 40 hp more than the new C6 Z06's run... So Z06's are done... And good for you ZO6AINT****those are good numbers it all depends on how the shop tunes it...
08-14-2007, 10:15 AM
#6
4th Gear Member
Join Date: Jul 2006
Location: Pittsburg, CA (BAY AREA!)
Posts: 1,399
RE: New Dyno Numbers
Your screen name is funny. I hope none of the Z06 owners in the Street Kill section see it.. [:@]... Lol. [8D]
But your numbers seem where they should be,despite having a home-made ported blower and TB. I wouldn't expect high gains from that at all (assuming you're not a machinist or have porting experience). And you'd definitely dyno a little higher in cooler weather.
But your numbers seem where they should be,despite having a home-made ported blower and TB. I wouldn't expect high gains from that at all (assuming you're not a machinist or have porting experience). And you'd definitely dyno a little higher in cooler weather.
08-14-2007, 02:11 PM
#7
4th Gear Member
Join Date: May 2005
Location: New York
Posts: 1,648
RE: New Dyno Numbers
ORIGINAL: ZO6AINT****
Yes I have Raced a Z06 It was C6 and I put about three cars on him. I am working on my wet shot as we speak so this coming up weekend Its going to be a C6 z06 next
Yes I have Raced a Z06 It was C6 and I put about three cars on him. I am working on my wet shot as we speak so this coming up weekend Its going to be a C6 z06 next
08-14-2007, 06:20 PM
#8
2nd Gear Member
Join Date: Feb 2007
Location:
Posts: 329
RE: New Dyno Numbers
Who put down an 11.6 in the quarter in the new zo6? Road and track put down 11.8 and they are ammmmmaaaazzzing drivers. And mabe it was a c5 Z06 and just a normal C6. That would be a pretty good race c5 Z06 vs. C6(not z06)? And ive raced the new C6 Z06 it was a short run with my old tune and he had exhaust from like 40- 85 mph but it was real close. The new Z06's only put 440-450hp at the wheels(in the aspect they put 505 at the flywheel) also the c6 z06 has 470 flywheel tq which is way down from the cobras tq. Not saying that the cobra would win but it would be a closer race than you would think.
08-14-2007, 07:48 PM
#10
6th Gear Member
Join Date: Dec 2005
Location: Florida
Posts: 5,893
RE: New Dyno Numbers
yeah thats much better.... stop magazine racing... they're not "amazing drivers" they suck actually more instances then not...
There was actually a guy that got into the 10s on a stock C6 Z06, with drags... The z06 might be close race (if he were stock) but he wouldn't have put 3 cars on it....
There was actually a guy that got into the 10s on a stock C6 Z06, with drags... The z06 might be close race (if he were stock) but he wouldn't have put 3 cars on it....