SVT Forums

Best bang for the buck?

Thread Tools
 
Search this Thread
 
Old Oct 8, 2007 | 07:49 PM
  #1  
StylinM6s's Avatar
StylinM6s
Thread Starter
2nd Gear Member
 
Joined: Jul 2007
Posts: 242
From: PA
Default Best bang for the buck?

I'm looking for the best bang for the buck power upgrade. At first I was looking at steeda pulleys but now that I saw gears being near the same price I might go with 4.10s.I'm not a big mod person now, I would be if cash and being in school wasn't a factor. After doing a little research I guess you lose a little bit of gas mileage? Also I have actually not seen gains on gears. I've read it's hard to tell the difference on dyno because the wheel spins to fast or somethin. But what is the hp/torque gain on 4.10 gears? I see there is a lot of bouncing around from 3.73s and 4.10s? Should I just get 3.90s since they're in the middle. I'm not into racing or are hard on the car just want some more power. Should I just get pulleys since gears will be pricey on the install? Can I have some help?
Old Oct 8, 2007 | 08:09 PM
  #2  
POISND U's Avatar
POISND U
5th Gear Member
 
Joined: Nov 2006
Posts: 3,569
From: So Cal
Default RE: Pulleys or Gears?

Nobody on this board will choose pulleys over gears.
Old Oct 8, 2007 | 08:11 PM
  #3  
mfj's Avatar
mfj
Banned
 
Joined: Aug 2007
Posts: 2,463
From: AZ
Default RE: Pulleys or Gears?

gears FTMFW!!!!!!!!
Old Oct 8, 2007 | 08:16 PM
  #4  
StylinM6s's Avatar
StylinM6s
Thread Starter
2nd Gear Member
 
Joined: Jul 2007
Posts: 242
From: PA
Default RE: Pulleys or Gears?

ORIGINAL: POISND U

Nobody on this board will choose pulleys over gears.
[/align][/align]haha yeah true i should of just kept it wanting best bang for the buck. but i don't understand gears, is it only for a mechanical advantage? because i've never read someone say it gains power, just gains launch[/align]
Old Oct 8, 2007 | 08:28 PM
  #5  
mfj's Avatar
mfj
Banned
 
Joined: Aug 2007
Posts: 2,463
From: AZ
Default RE: Pulleys or Gears?

nooo, it does not give u morepower, but it keeps ur car in the powerband while racing...... everytime u shift, when racing, ur in a nice high rpm...... u'll see very decent gains in ur 1/4 mile times... a lot more than pulleys would get u
Old Oct 8, 2007 | 08:29 PM
  #6  
xxkazp3rxx's Avatar
xxkazp3rxx
6th Gear Member
 
Joined: Dec 2005
Posts: 5,893
From: Florida
Default RE: Pulleys or Gears?

I choose a pulley over gears... [8D]

ORIGINAL: POISND U

Nobody on this board will choose pulleys over gears.
Old Oct 8, 2007 | 08:31 PM
  #7  
StylinM6s's Avatar
StylinM6s
Thread Starter
2nd Gear Member
 
Joined: Jul 2007
Posts: 242
From: PA
Default RE: Pulleys or Gears?

Oh wellthen it ain't for me. I don't race or go to the track I'm just looking for the best bang for the buck upgrade in power. Don't need to look into intake, I'm fine with the air silencer taken off w/K&N for now. I'm lookin into exhaust kind of but I need cats for PA inspection and it has to be no more than $400 and sound good so that's out.
Old Oct 8, 2007 | 08:39 PM
  #8  
mfj's Avatar
mfj
Banned
 
Joined: Aug 2007
Posts: 2,463
From: AZ
Default RE: Pulleys or Gears?

i thnk ur confused. ppl want power to go faster..... ur gonna go faster with the gears, than u r with the pulleys. pulleys are a waste of money IMO.
Old Oct 8, 2007 | 08:40 PM
  #9  
mfj's Avatar
mfj
Banned
 
Joined: Aug 2007
Posts: 2,463
From: AZ
Default RE: Pulleys or Gears?

ORIGINAL: xxkazp3rxx

I choose a pulley over gears... [8D]

ORIGINAL: POISND U

Nobody on this board will choose pulleys over gears.
not to confuse the original poster.... redfire chose pulleys, because he has a supercharger, so getting a smaller charger pulley, and a larger crank pully, increased his boost, hence increased his power.


if u get an underdrive pully system on ur NA car, u will see very minimal gains
Old Oct 8, 2007 | 08:42 PM
  #10  
StylinM6s's Avatar
StylinM6s
Thread Starter
2nd Gear Member
 
Joined: Jul 2007
Posts: 242
From: PA
Default RE: Pulleys or Gears?

You just said it does not give me more power, but that's what I'm looking for. Not a launch for a 1/4 or racing. Just interested in getting more pep. Alright then if pulleys are minor what is the real best bang for the buck upgrade then?



All times are GMT -5. The time now is 11:55 AM.