ok anyone know about how much it cost to putyour car on the dyno to seeyour hp and a/f ratio

 

Probably be around $100 to get 3 pulls on a dyno to find out rwhp.

Dyno tuning following upgrades.....costs around $150/hr (2 to 3 hoursto get you zeroed in).

 

For my GT, it cost me $450 cash for a full dyno tune w/ A/F Ratio corrected and everything. It only took 3 pulls to get the car where it needed to be. So for 3 pulls w/o wideband around me is around $100 or so. With wideband it's around $150...

 

I was told $500 by a shop near here one time for a dyno tune, however they are one of the more expensive shops (they mainly focus on BIG builds), so you can probably find it lower than that some places.

 

count on around 400 or so for a dyno tune, and the shop i go to is 75 for 3 pulls with wideband.

 

I paid $550 for my tune and it costs $65 for 3 pulls.

 

usually 3 pulls for $75 with air/fuel... my car took about7 pulls to tune correctly and cost me a lil bit over $500

 

The shop closest to me is looking to get $175 for an hour of tuning.

 

Which shop do you go to? HiTech in Elk River?

 

i have been there, but i use DB peformance for all my tuning. they are located in rogers.