time for it to go
#1
time for it to go
well guys i guess it is official, i am going to be selling off my setup. everything will be going. I know this should go in classifieds but i thought i would put it here also since most of the guys that it applies to are in here.
heres the list haven't decided on prices yet for everything yet so i will take it on a case by case basis for now. pics of everything available upon request.
1. Stegie stage 3 ported and polished blower with moto blue 2.93 oulley and hub. - only imperfection is one of the bolts to hole the pully on the hub is broken off, should be easy to remove but has never casued me a problem so i let it be.
2. accufab polished plenum
3. LFP 4# lower crank pully kit - SOLD
4. silver billet flow 4 pc idler set and snub bracket
5. JLT cold air intake (silver) -SOLD
6. simens dieka 60# injectors - SOLD
7.
8. lfp super cooler resivior - SOLD
9.i should also have the cac and lower intake as well, not 100% if i will need the lower intake for the turbo set up or not yet.
10. Mafia- don't think i will need this anymore either. SOLD
11. 3.4 in alternator pully - SOLD
12. Fluidyne Heat exchanger SOLD
I will also be selling the gas tank the fuel pumps and the IRS at some point as well as the Magnaflow cat back exhaust.
I am sure there will be other stuff as weel as the project gets under way. if you are interested in anything pm me or post um and we can talk about the details.
The car with this setup made 522rwhp and 498 rwtq. I can providea dyno sheet upon request.
heres some basic pics of the stuff. i can get more upon request but alot of this stuff is still on the car. car is currently at DB performance going under the knife.
heres the list haven't decided on prices yet for everything yet so i will take it on a case by case basis for now. pics of everything available upon request.
1. Stegie stage 3 ported and polished blower with moto blue 2.93 oulley and hub. - only imperfection is one of the bolts to hole the pully on the hub is broken off, should be easy to remove but has never casued me a problem so i let it be.
2. accufab polished plenum
3. LFP 4# lower crank pully kit - SOLD
4. silver billet flow 4 pc idler set and snub bracket
5. JLT cold air intake (silver) -SOLD
6. simens dieka 60# injectors - SOLD
7.
8. lfp super cooler resivior - SOLD
9.i should also have the cac and lower intake as well, not 100% if i will need the lower intake for the turbo set up or not yet.
10. Mafia- don't think i will need this anymore either. SOLD
11. 3.4 in alternator pully - SOLD
12. Fluidyne Heat exchanger SOLD
I will also be selling the gas tank the fuel pumps and the IRS at some point as well as the Magnaflow cat back exhaust.
I am sure there will be other stuff as weel as the project gets under way. if you are interested in anything pm me or post um and we can talk about the details.
The car with this setup made 522rwhp and 498 rwtq. I can providea dyno sheet upon request.
heres some basic pics of the stuff. i can get more upon request but alot of this stuff is still on the car. car is currently at DB performance going under the knife.
#4
RE: time for it to go
ORIGINAL: spray175
Hes going turbo.
You will need a 99-01 upper and lower intake. So you will be able to get rid of your stock lower intake and intercooler.
Hes going turbo.
You will need a 99-01 upper and lower intake. So you will be able to get rid of your stock lower intake and intercooler.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
5.0L GT S550 Tech
7
10-07-2015 04:01 AM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM