03cobravenom

so i would need a 90mm or 100mm with the stock eaton?

MAD SVT

yep... you can check Ebay, i see a bunch on there for pretty cheap too..
otherwise its like $120 for either the metco or billetflow (i just like the way the bf's look)

either 90 or 100mm would be fine

http://www.lethalperformance.com/03-...c-16_1131_1549
stay away from the UPR one (i dont know from personal experience, but everyone seems to think their products are crap, and i dont want to use MY money to try and prove them wrong haha)

Timspony

Which ever one you get, you will need to get a SC belt 1/2" longer (I went from a 74" to 74.5" belt...)

03cobravenom

the sound is more like a hissing noise, it only seems to happen when i first accelerate, then when i get higher up in rpm's it will go away and i will start to hear the supercharger whine.....does this sound like the belt is slipping or a pulley?????

pcs

is the boost dropping off?
as for the aux idler i got a good deal on a steeda 100mm

03cobravenom

hey timspony, where did you get that cobra term sticker thats on your engine bay? what does it say on it?

Blownsvt

if the belt is slipping badly there will be lots of belt dust under the hood. You should not be making pulls onit with a brand new clutch either. you need to break that in or you will be putting another one in real soon.

03cobravenom

im def babying the new clutch....do you know the part number of the belt to put in once i get the idler puller? the part number i have there now is gatorback 4080772

Timspony

Details on the tag.... http://stangshiftergaskets.com/terminator_id_tags.htm

Build Number, Date & My Name

Timspony

Check your belt # ....doesn't look right ....What's your current set-up with pulley's??