Drive belt help

Reply Subscribe

Thread Tools

Search this Thread

Jul 28, 2009 | 07:05 PM

jimbob8915

Thread Starter

1st Gear Member

Joined: May 2008

Posts: 88

From:

Drive belt help

Ok I have searched and have seen what belt for a 2.8 pulley but I have a Metco 100mm idler what belt length do I need? My current belt is a Motorcraft 2R3V-8620-BC. How long is this belt and what would be the next size smaller part number?

Jul 29, 2009 | 07:47 PM

P.S.I.cho

4th Gear Member

Joined: Mar 2005

Posts: 1,123

From:

call napa for a gates part number cross reference

Jul 30, 2009 | 11:38 AM

hot sauce

2nd Gear Member

Joined: Jul 2009

Posts: 311

From: texas

or you can just call your tuner and ask them pretty sure they have done 2.8 pullies swaps

Jul 30, 2009 | 08:01 PM

jimbob8915

Thread Starter

1st Gear Member

Joined: May 2008

Posts: 88

From:

Quote:

Originally Posted by hot sauce

or you can just call your tuner and ask them pretty sure they have done 2.8 pullies swaps

LOL my "tuner" is a Kenne Bell switch chip. My tune was for a 3" pulley but my afr monitor was showing 10 at WOT so I put in the 2.8 and now get 16 psi with 12 afr. I am happy with tune and all just concerned with belt slip.