Coming from a non newb, but anyway, did a brief search and couldn't find anything... What are the COMPLETE specs on the STOCK 03/04 cobra cams...

 

OMG its MFJ, WTF! Where have ya been? Sorry don't have an answer to your question, just had to say hey lol

 

Hey man! What's up?! lol I've been busy with School the whole semester, lol... Finally, my car is back up... Going through another break in period, haha... Man, these stage 3 comps make my car so much louder!

 

Ha yea I hear ya about school. You need to get a vid up with the stage 3's. What does your exhaust consist of? Like what brand headers, mid, and cb?

 

I'll have a video up probably by tomorrow...

I got Kooks Long Tubes with 1 7/8" primaries, a catless Dr. Gas 3in X pipe, and a Mac 3in Catback, but I took out the mac mufflers, and put in SINGLE CHAMBER flowmasters (none of that 40 series BS, lol)... The car is really too loud lol

 

I found my answer:

96-98 Cobra Cam Specs:
Intake: Primary Lobe 196 duration (at .050)/ 394 lift
Secondary Lobe 206 duration (at .050)/ 394 lift
Exhaust: 196 duration / 394 lift (at .050)
114° LCs

99/01 Cobra Cam Specs:
Intake: 194 duration (at .050) / 392 lift
Exhaust: 194 duration (at .050)/ 390 lift
114° LCs

Mach 1, 03/04 Cobra, Aviator, Marauder, 93-98 Mark VIII, Navigator.
Intake: 184 deg @ .050"/0.370" lift
Exhaust: 196 deg @ .050 / .370" lift
114° LCs

FR500 Cams
lift, .472 “ [12mm] both intake and exhaust
intake duration adv 258, 212@.050
exhaust duration adv 254, 208@.050
109° LCs

2000 Cobra R:
intake: 212 dur@.050/.510
exhaust: 212 dur@.050 /.474

 

^^ Good information!