1996 cobra engine support

Reply Subscribe

Thread Tools

Search this Thread

Aug 18, 2013 | 12:29 PM

slither1996

Thread Starter

Joined: Aug 2013

Posts: 1

From: michigan

1996 cobra engine support

hello, i'm trying to find a good way to support my 96 cobra engine to take the oil pan out, still need to drop the suspension and there are no eye lits on the manifold, any suggestions???

Aug 21, 2013 | 02:22 PM

uberstang1

Chupacabra

Joined: Jul 2004

Posts: 9,621

From: wilkes-barre PA

You can use an engine support bar, and use the two alternator bolt holes on the block. Did this a dozen times dropping k members. Can get an engine support bar at harbor freight for around $75

Aug 26, 2013 | 10:57 AM

NicksGTR

Joined: Aug 2007

Posts: 12

Quote:

Originally Posted by uberstang1

You can use an engine support bar, and use the two alternator bolt holes on the block. Did this a dozen times dropping k members. Can get an engine support bar at harbor freight for around $75

+1^^^. I used Harbor Freight's bar to install my MM front suspension. I did upgrade the chains at the alternator contact points, though.