Pulley Swap
Thread Starter
Joined: Dec 2013
Posts: 1
From: Virginia
Pulley Swap
I'm currently running a 2.76" upper only with a set of idlers for good measure and I keep hearing nothing but good things about running a 2.93" upper and a 2/4 lb lower... I was wondering if anybody here has either of these set-ups? What kind of numbers are you making? Already have all the cooling upgrades I'll need aside from porting the Eaton so that's no issue. Any input???
SVT Section Moderator
Joined: Jul 2008
Posts: 15,600
From: Burnt Hills, NY
Welcome to MF 
.... what cooling mods do you have on the car? I personally wouldn't install a 2 or 4# lower until you address this!! Also, ported Eaton's really like the lower's!! I'm running a 4# lower myself with a 7.5 gallon Chiseled Tank in the trunk and a AFCO HE
.... what cooling mods do you have on the car? I personally wouldn't install a 2 or 4# lower until you address this!! Also, ported Eaton's really like the lower's!! I'm running a 4# lower myself with a 7.5 gallon Chiseled Tank in the trunk and a AFCO HE 
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM