Should I call him out?
03-01-2012, 10:52 AM
#112
Retired Mod
Join Date: Jan 2007
Location: Long Island, NY
Posts: 7,658
There was a local guy that used to visit this forum alot that had a c6Z. I cant remember his name to save my life but remember he ran with stkjock. He ran everything from an 11.79 to a 13.4. If I recall corectly he had way more 12 second runs than the one 11 second glory pass. Those Vettes are hard to launch. With that said were talking about a 5.0 that will most likely trap 116-118 to a vette that traps 122-124. But I believe an auto modded 5.0 on slicks has a very very good chance of betting the z06 in the 1/4.
When we ran heads up, I tree'd him hard (not that my RT was all that great) and out 60'd him hard. Had the track been 1420' not 1320' he'd gotten me.
as to the rest of this thread... what a Cluster F ............
03-01-2012, 11:08 AM
#114
yea, that was Ed, his SN escapes me ATM, he came to a rental at Island Dragway. His first pass was a 11.75. I don't think he had another one in the 11s
When we ran heads up, I tree'd him hard (not that my RT was all that great) and out 60'd him hard. Had the track been 1420' not 1320' he'd gotten me.
as to the rest of this thread... what a Cluster F ............
When we ran heads up, I tree'd him hard (not that my RT was all that great) and out 60'd him hard. Had the track been 1420' not 1320' he'd gotten me.
as to the rest of this thread... what a Cluster F ............
03-02-2012, 01:33 PM
#116
Mish-ogynist
Thread Starter
Join Date: Nov 2007
Location: Helena, MT
Posts: 3,780
oh i guess as long as we are talking record times.. I guess all i need to do to beat a stock c6z06 is a few more bolt-ons(LT headers, driveshaft, torque converter, LCAs, panhard bar) and some tires/wheels.
2011 5.0 GT 300A car with Brembos
Totally stock and untouched longblock.
Boss Intake, stock Tbody
JLT CAI
WMS SCT Tune
Dynatech LT's with catless mids
Pypes supersystem exhaust
Barton Shifter
3:90 gears with True trac
Alum one piece driveshaft
Racestar 15x10 and 17x4 wheels
Hoosier 28x10.5x15 full slick
Mcleod clutch (RST)
Metco LCA's with relocation brackets
stock upper uca
stock shocks/struts/springs
UPR panhard bar
Rad support/swaybar delete
3550lbs with me in the car (was 3695 stock with me in it)
436/379 on our Dynojet Dyno last time on same tune that set the record
1.48 short time
10.88@125mph
also Matt D has gone 10.85@124 with Boss intake, kooks long tubes, and JLT cai in a 3100lbs car (I believe it's a gutted '06, it has a coyote engine in it)
2011 5.0 GT 300A car with Brembos
Totally stock and untouched longblock.
Boss Intake, stock Tbody
JLT CAI
WMS SCT Tune
Dynatech LT's with catless mids
Pypes supersystem exhaust
Barton Shifter
3:90 gears with True trac
Alum one piece driveshaft
Racestar 15x10 and 17x4 wheels
Hoosier 28x10.5x15 full slick
Mcleod clutch (RST)
Metco LCA's with relocation brackets
stock upper uca
stock shocks/struts/springs
UPR panhard bar
Rad support/swaybar delete
3550lbs with me in the car (was 3695 stock with me in it)
436/379 on our Dynojet Dyno last time on same tune that set the record
1.48 short time
10.88@125mph
also Matt D has gone 10.85@124 with Boss intake, kooks long tubes, and JLT cai in a 3100lbs car (I believe it's a gutted '06, it has a coyote engine in it)
Last edited by Mishri; 03-02-2012 at 03:08 PM.
03-02-2012, 06:42 PM
#118
4th Gear Member
Join Date: Apr 2007
Location: Georgia
Posts: 1,196
oh i guess as long as we are talking record times.. I guess all i need to do to beat a stock c6z06 is a few more bolt-ons(LT headers, driveshaft, torque converter, LCAs, panhard bar) and some tires/wheels.
2011 5.0 GT 300A car with Brembos
...
1.48 short time
10.88@125mph
also Matt D has gone 10.85@124 with Boss intake, kooks long tubes, and JLT cai in a 3100lbs car (I believe it's a gutted '06, it has a coyote engine in it)
2011 5.0 GT 300A car with Brembos
...
1.48 short time
10.88@125mph
also Matt D has gone 10.85@124 with Boss intake, kooks long tubes, and JLT cai in a 3100lbs car (I believe it's a gutted '06, it has a coyote engine in it)
'08 Corvette Z06, Bolt ons ONLY:
60'.............1.366
1320'..........9.973
1320’ mph…137.72
Name of the track: Atco
Date of pass: 12/3/11
Mod list & info:
http://forums.corvetteforum.com/1579...-post1363.html
03-02-2012, 07:40 PM
#120
6th Gear Member
Join Date: Jan 2008
Location: colorado
Posts: 6,395
Thats pretty cool, very fast time. But I'm not sure what you getting at? So with bolt ons the 5.0 record is only about a second slower than the C6 Z06 record.
'08 Corvette Z06, Bolt ons ONLY:
60'.............1.366
1320'..........9.973
1320’ mph…137.72
Name of the track: Atco
Date of pass: 12/3/11
Mod list & info:
http://forums.corvetteforum.com/1579...-post1363.html
'08 Corvette Z06, Bolt ons ONLY:
60'.............1.366
1320'..........9.973
1320’ mph…137.72
Name of the track: Atco
Date of pass: 12/3/11
Mod list & info:
http://forums.corvetteforum.com/1579...-post1363.html
holy chit