Next best mod?
3.73 or 4.10 gears and a detroit truetrac should bethe next mod.
screw the CAI unless it's a $40 EBAY one
UD pullies are pretty good but can't be used with a blower but are nice with a turbo setup
1.8ratio adj rockers are a nice addition that will net close to 10rwhp and give .021" additional lift. pretty easy to install too
screw the CAI unless it's a $40 EBAY one
UD pullies are pretty good but can't be used with a blower but are nice with a turbo setup
1.8ratio adj rockers are a nice addition that will net close to 10rwhp and give .021" additional lift. pretty easy to install too
ORIGINAL: 97blustang
1.8ratio adj rockers are a nice addition that will net close to 10rwhp and give .021" additional lift. pretty easy to install too
do you happen to know how much that cost?
1.8ratio adj rockers are a nice addition that will net close to 10rwhp and give .021" additional lift. pretty easy to install too
do you happen to know how much that cost?
http://rpm-mustangs.com/cart/product...cat=255&page=1
for the 1.8's and much more
ORIGINAL: MustangPrince24
oh, well he said the intake is LESS than the pulley and i kno at autobadges the intake is almost 100 bucks more, i just wanted to kno what brand of intakes he was talking about
oh, well he said the intake is LESS than the pulley and i kno at autobadges the intake is almost 100 bucks more, i just wanted to kno what brand of intakes he was talking about
ORIGINAL: 97blustang
really u can do that? any thing you have to mod to swap that?
really u can do that? any thing you have to mod to swap that?
get a set of gears, a t-lok will be fine for bolt ons but if you want serious power go with a detroit true trac
Thread
Thread Starter
Forum
Replies
Last Post




