I know this isn't my thread so I hope you don't mind.

All of the information I have found (modern websites) are for V6 (headers, exaust,ect) Any good places to look for an inline six. Power happy, but sound would be nice too.


One more question for the road. Anyone in PA?

 

i have a xpipe with high flow cats with gt borla exaust and it sounds bad *** IMO

 

Hey. I thought about going with a stainless steel H pipe and flow master 40s. I heard the flawmaster40s sound nice. However Im going to have to get the H pipe custom b/c no one offers a complete H pipe for the 6. Unless there is an H pipe thats a direct bolt on in place of the Y pipe let me know. Othewise I was told Id have to get one custom bent. Also I was always told the X pipes were louder?

 

there is a h pipe u can just bolt MAC makes one http://www.macperformance.com/store/...ategory_ID=477 they also make one if u have long tube hearders, and for a xpipe Pypes makes one that u can just bolt on thats where my xpipe is from

 

I know about the X pipe from pypes. I was told they were aluminized and would corrode easy. IM looking for a stainless steel H pipe kit. Are the macs stainless? Also which is louder X or H. I dont know anymore?

 

the pypes xpipe is stainless steel "Pypes Mustang crossovers are second to none! They all feature 2.5� mandrel bent, 409 Stainless Steel pipe and fit in the stock location. Flanges, mounting hardware, O2 sensor rings, reinforcement plates, air tubes and ball flare connections are all standard features (where applicable) on these exceptional crossovers. Our X-pipe kits for short tube headers are a two piece assembly that makes installation much easier and also allows for lower cost shipping." and i think a xpipe is louder ive never heard a v6 with a hpipe but thats what ive been told. iam not sure if the MAC hpipe is stainless steel though

 

So who are selling the Pypes? Anyone with ties to the forum?


Solo

 

romoutlet.com

 

rpmoutlet.com (sorry)

 

You do know about the edit-function, right?


Solo