V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

Door Lock doesn't work properly

Thread Tools
 
Search this Thread
 
Old Oct 4, 2010 | 04:51 PM
  #1  
thewalesaver's Avatar
thewalesaver
Thread Starter
 
Joined: Oct 2010
Posts: 1
From: NC
Default Door Lock doesn't work properly

I've had a problem with my '01 for about a year now where the lock on my car door will most of the time not go down or come up when I use the key remote or the lock/unlock button inside the car. It started happening on the driver's side door only because my friend sat in the car and held the lock down while I tried to unlock it using the remote.

When I try to unlock/lock it with the remote or the button inside, it goes up/down halfway and then goes back up/down to it's original position (so pushing the lock button leaves the driver's side of the car unlocked and vice versa), like it wants to unlock/lock but it doesn't. On rare occasions, it will make it all the way to the unlocked/locked position but, usually, it doesn't.

I'm tired of having to remember to push the lock down before I get out of my car and close the door or having to use the key to get in the driver's side. What should I do to fix this?
Old Oct 4, 2010 | 05:33 PM
  #2  
SON1C's Avatar
SON1C
3rd Gear Member
 
Joined: May 2009
Posts: 557
From: Northern Virginia
Default

Originally Posted by thewalesaver
I've had a problem with my '01 for about a year now where the lock on my car door will most of the time not go down or come up when I use the key remote or the lock/unlock button inside the car. It started happening on the driver's side door only because my friend sat in the car and held the lock down while I tried to unlock it using the remote.

When I try to unlock/lock it with the remote or the button inside, it goes up/down halfway and then goes back up/down to it's original position (so pushing the lock button leaves the driver's side of the car unlocked and vice versa), like it wants to unlock/lock but it doesn't. On rare occasions, it will make it all the way to the unlocked/locked position but, usually, it doesn't.

I'm tired of having to remember to push the lock down before I get out of my car and close the door or having to use the key to get in the driver's side. What should I do to fix this?
I have pretty much the same problem with my 01 driver side door.
Old Oct 4, 2010 | 07:53 PM
  #3  
WoahPony's Avatar
WoahPony
3rd Gear Member
 
Joined: Feb 2010
Posts: 585
From: New Hampshire
Default

take the interior panel off and make sure its still attached correctly to the rest of the locking assembly? other than that I dunno
Old Oct 25, 2010 | 11:02 AM
  #4  
d.girardi's Avatar
d.girardi
2nd Gear Member
 
Joined: Oct 2009
Posts: 173
From: AL
Default

When I bought mine, I had to unscrew the thing that goes up/down when you unlock/lock it just a little bit. I know with mine it was screwed on too tight and the lock wouldn't go all the way down and catch so it could stay down.
Old Oct 25, 2010 | 07:38 PM
  #5  
srsbzns99's Avatar
srsbzns99
 
Joined: Sep 2010
Posts: 3
From: Mississippi
Default

i had the same problem with my '99 mustang but on the passenger side
my problem was the actuator, cheap and relatively simple to install
Old Oct 26, 2010 | 07:26 PM
  #6  
haystackstang's Avatar
haystackstang
2nd Gear Member
 
Joined: Nov 2006
Posts: 490
From: Ca
Default

its your power door lock going out mine does the same except on the sn95s its passenger side
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JonnyBlazeGT
Archive - Mustangs For Sale
3
Nov 3, 2015 01:10 AM
YoungStangsMan
5.0L (1979-1995) Mustang
15
Sep 5, 2015 07:01 PM
Tyoung68
New Member Area
7
Aug 25, 2015 04:31 AM
Barcafut13
2005-2014 Mustangs
0
Aug 13, 2015 08:05 AM
Barcafut13
GT S197 General Discussion
0
Aug 10, 2015 07:44 PM




All times are GMT -5. The time now is 11:20 PM.